<div dir="ltr"><div><div><div><div><div><div><div><div>Is the board really than much smaller than an SO DIMM?<br></div>The specs I have for the Turbot are 99mm x 74mm<br></div>And SO-DIMM comes in 68mm round numbers.<br><br></div>This is why I suggested it be on a shield with a separate RAM Expansion connector.<br></div>I know things are tight, but what if expansion was ENTIRELY on a shield with a SO-DIMM Slot or two?<br></div><div>The connector would merely expose the processor's normal lines for addressing RAM, and all the glue to make it work would be on the shield. Maybe a plcc type socket directly under the processor. It shouldn't be much thicker than the HSE connector, and could provide an HSE pass-though while maintaining board size.<br><br>I know 32GB was a bit of pipe dream. Even my ITX systems can only handle 16GB. LOL.</div><div>But an 8GB options would be sweet!<br></div><div><br></div>Alternatively, is there a way to just put a socket for the RAM chip on the board, and let the user upgrade the RAM chips? You could ship with 2GB and people could upgrade without SMT soldering gear.<br></div></div><div><br></div>SATA isn't as big an issue for me. MicroSD tech is moving at a good pace with speed and capacity.<br></div><div>Maybe 2 stacked<span style="font-family:arial,helvetica,sans-serif"><span id="productTitle" class=""></span></span><span id="productTitle" class=""> UHS-I/U3 </span><span style="font-family:arial,helvetica,sans-serif"></span><span style="font-family:arial,helvetica,sans-serif"><span id="productTitle" class="">SDXC</span></span><span style="font-family:arial,helvetica,sans-serif"> slots if you can find a connector. That WOULD be cool.<br>But since SATA is already in there, I don't suggest removing it. LOL!<br><br></span>If you DID add a dedicated RAM connector, maybe a <span style="font-family:arial,helvetica,sans-serif">SATA chipset that does supports port SATA port multipliers<br></span></div><div><span style="font-family:arial,helvetica,sans-serif">could go on there to make people who want that happy.<br><br></span></div><div><span style="font-family:arial,helvetica,sans-serif">You could even isolate your 12V lines there, since at this point everything that requires 12V would be under the Minnowboard.<br></span></div><div><span style="font-family:arial,helvetica,sans-serif"><br></span>On another note... 300 out 100 cool points for being able to get same day feedback from the Engineering Dev's!!!!<br></div><br></div>