<html><head></head><body>You've got a dead (hardware) board, I'd contact rma@minnowboard.org and we'll get that moving.<br>
<br>
- John<br><br><div class="gmail_quote">On October 10, 2015 2:18:23 PM CDT, Eric <ericolv@cox.net> wrote:<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<pre class="k9mail">The first MBM I bought died a while back. When I say 'died', I mean the<br />board stopped functioning. I plug it in and only one blue light comes on,<br />that's it, nothing else happens. It arrived this way when I bought it and I<br />sent it back to CircuitCo, they reflashed it and sent it back. It worked<br />for a while, then went dead again. I didn't want to spring for a DediProg,<br />so when I heard about the SPI Hook, I bought one. <br /><br />I've tried this with both the 32 and 64 bit version 0.83 firmware but no<br />luck. Here is the complete output from Flashrom w/SPI Hook<br /><br /><br />===================Flashrom output====================<br />sudo flashrom -p ft2232_spi:type=2232h,port=A,divisor=4 -w<br />MinnowBoard.MAX.I32.083.R01.bin <br /><br />flashrom v0.9.6.1-r1563 on Linux 3.19.0-30-generic (x86_64)<br />flashrom is free software, get the source code at <a href="http://www.flashrom.org">http://www.flashrom.org</a><br /
><br
/>Calibrating delay loop... OK.<br />===<br />SFDP has autodetected a flash chip which is not natively supported by<br />flashrom yet.<br />All standard operations (read, verify, erase and write) should work, but to<br />support all possible features we need to add them manually.<br />You can help us by mailing us the output of the following command to<br />flashrom@flashrom.org: <br />'flashrom -VV [plus the -p/--programmer parameter (if needed)]'<br />Thanks for your help!<br />===<br />Found Unknown flash chip "SFDP-capable chip" (8192 kB, SPI) on ft2232_spi.<br />Reading old flash chip contents... done.<br />Erasing and writing flash chip... Erase/write done.<br />Verifying flash... VERIFIED. <br /><br />===================End Flashrom output====================<br /><br />Error messages notwithstanding, it appears to have successfully flashed the<br />board but when I plug it it, same thing, one blue light and nothing else.<br /><br /><br />Anybody have input on
what I
might try or what I might be missing?<br /><br />Thanks<br /><br /><br /><hr /><br />elinux-MinnowBoard mailing list<br />elinux-MinnowBoard@lists.elinux.org<br /><a href="http://lists.elinux.org/mailman/listinfo/elinux-minnowboard">http://lists.elinux.org/mailman/listinfo/elinux-minnowboard</a><br /><br /></pre></blockquote></div></body></html>