<div dir="ltr">Why F1 can not be shorted as a regular fuse?. I know F1 was put there for a reason, but most switched power supplies have overcurrent protection, so connectiong a very havy load to the USB should only result in the power supply going off as protection. </div><div class="gmail_extra"><br><div class="gmail_quote">2015-07-01 17:54 GMT-05:00 John Hawley <span dir="ltr"><<a href="mailto:john.hawley@intel.com" target="_blank">john.hawley@intel.com</a>></span>:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">As was suggested, the likely cause is a blown F1 (from what we've seen).<br>
 The fuse can be found on the top of the board near the USB connectors,<br>
opposite side from the sd-card cage.  It's a little blue thing with an<br>
"N" on it.  If you have a multimeter, you can check if there's any<br>
voltage across the line while the board is on, to see if it's blown (and<br>
something I'd recommend before considering an RMA or attempting to<br>
repair it yourself).<br>
<br>
Although it is possible to replace it with another 1.5A - 2A fuse of the<br>
same size (it has to be soldered), be aware that doing so will  void<br>
your manufacturer's warranty.<br>
<br>
If you've been able to confirm that F1 is in fact blown, I'd recommend<br>
going through the RMA process as your first option.<br>
<br>
- John 'Warthog9' Hawley<br>
<span class=""><br>
On 07/01/2015 02:42 PM, Ferchu R wrote:<br>
> I had the same issue as Peter (broken F1). At the time, the only<br>
> walkaround was using a powered USB Hub. I asked on this board how can I<br>
> get the board back to its functionality, but sadly I was not given any<br>
> advice, even from CircuitCo.<br>
><br>
><br>
><br>
> 2015-07-01 14:58 GMT-05:00 peter <<a href="mailto:peter.bolch@t-online.de">peter.bolch@t-online.de</a><br>
</span>> <mailto:<a href="mailto:peter.bolch@t-online.de">peter.bolch@t-online.de</a>>>:<br>
<span class="">><br>
>     Hi Sidney,<br>
><br>
>     I had the same effect with my Minnow Board. Someone here suggested<br>
>     to check fuse F1 (to the left of the USB connector). It was blown<br>
>     although there was just a keyboard connected to the board.<br>
><br>
>     Peter<br>
><br>
><br>
>     On 01.07.2015 21:15, Sydney Lybert wrote:<br>
><br>
>         Hello,<br>
><br>
><br>
>         I recently purchased a Minnowboard. I was attempting to install<br>
>         an OS on<br>
>         it (Ubuntu 14.04.2). During the installation, it suddenly died,<br>
>         and now<br>
>         the USB connections won't pick up any USB devices. Any ideas why<br>
>         this<br>
>         would happen? I've tried disconnecting the power and restarting<br>
>         everything with the USB devices already connected, and I've tried<br>
>         powering on the board and then connecting the devices, to no avail.<br>
><br>
><br>
>         Thanks,<br>
><br>
>         -Sydney Lybert<br>
><br>
><br>
><br>
>         _______________________________________________<br>
>         elinux-MinnowBoard mailing list<br>
>         <a href="mailto:elinux-MinnowBoard@lists.elinux.org">elinux-MinnowBoard@lists.elinux.org</a><br>
</span>>         <mailto:<a href="mailto:elinux-MinnowBoard@lists.elinux.org">elinux-MinnowBoard@lists.elinux.org</a>><br>
<span class="">>         <a href="http://lists.elinux.org/mailman/listinfo/elinux-minnowboard" rel="noreferrer" target="_blank">http://lists.elinux.org/mailman/listinfo/elinux-minnowboard</a><br>
><br>
>     _______________________________________________<br>
>     elinux-MinnowBoard mailing list<br>
>     <a href="mailto:elinux-MinnowBoard@lists.elinux.org">elinux-MinnowBoard@lists.elinux.org</a><br>
</span>>     <mailto:<a href="mailto:elinux-MinnowBoard@lists.elinux.org">elinux-MinnowBoard@lists.elinux.org</a>><br>
<div class="HOEnZb"><div class="h5">>     <a href="http://lists.elinux.org/mailman/listinfo/elinux-minnowboard" rel="noreferrer" target="_blank">http://lists.elinux.org/mailman/listinfo/elinux-minnowboard</a><br>
><br>
><br>
><br>
><br>
> _______________________________________________<br>
> elinux-MinnowBoard mailing list<br>
> <a href="mailto:elinux-MinnowBoard@lists.elinux.org">elinux-MinnowBoard@lists.elinux.org</a><br>
> <a href="http://lists.elinux.org/mailman/listinfo/elinux-minnowboard" rel="noreferrer" target="_blank">http://lists.elinux.org/mailman/listinfo/elinux-minnowboard</a><br>
><br>
_______________________________________________<br>
elinux-MinnowBoard mailing list<br>
<a href="mailto:elinux-MinnowBoard@lists.elinux.org">elinux-MinnowBoard@lists.elinux.org</a><br>
<a href="http://lists.elinux.org/mailman/listinfo/elinux-minnowboard" rel="noreferrer" target="_blank">http://lists.elinux.org/mailman/listinfo/elinux-minnowboard</a><br>
</div></div></blockquote></div><br></div>