<div dir="ltr"><div>Hello mailing list. I recently received my minnow board but I have not been able to use it much without it locking up / resetting. I am using the stock kernel (3.8.13-yocto-standard) and image that comes with the minnow board. One sure way to make it lockup is running "opkg upgrade", it will freeze after 5-30 minutes. This is the message that prints out on the screen:<br>
<br>INFO: rcu_preempt self-detected stall on CPU<br><br></div>I can still see input I type show up on the screen, but I am unable to interrupt the running command with CTRL+C/CTRL+\/CTCL+Z <br><div><br>The first thing I tried to address this issue was updating my firmware (from 0.84 to 1.00), but this didn't seem to help. I have also searched google for general minnowboard freezes/lockups and the specific error message, but I turned up nothing. Is it possible I just have a bad board?<br>
<br>Thank you,<br><br>Carroll<br><br></div></div>