[MinnowBoard] problem with 0.94 firmware for Minnowboard Max

[Richardson, Brian]

Older releases of MinnowBoard Max/Turbot firmware are available on an archive page: https://firmware.intel.com/content/minnowboard-maxturbot-release-archives

If you have UEFI development questions for MinnowBoard, I recommend trying the EDK II developer list on groups.io. This is a more active discussion list. https://edk2.groups.io/g/devel

Thanks ... br
---
Brian Richardson -- Director of Firmware Ecosystem Engagements
brian.richardson at intel.com<mailto:brian.richardson at intel.com> -- @intel_brian<https://twitter.com/Intel_Brian>
Firmware Ecosystem & Business Development, Firmware Integration & Development (FID)
https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson

From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org> On Behalf Of Minnow Ware
Sent: Monday, April 8, 2019 5:28 AM
To: MinnowBoard Community Email List <elinux-minnowboard at lists.elinux.org>
Subject: Re: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max

Hi Zarah,

just remove that lines from the source code.

Looks to me that the board variant is identified there, by checking
how pins are strapped with resistors, but I don't have your sourcecode.

Use my tool to get familiar with Baytrail GPIO's.

https://github.com/MinnowWare/Visual-HWTools-for-UEFI-Shell/tree/master/x64/Efi64\BYTGPIOSpy.efi<https://github.com/MinnowWare/Visual-HWTools-for-UEFI-Shell/tree/master/x64/Efi64/BYTGPIOSpy.efi>

Don't use the old sourcecode!

Regards,
Kilian


________________________________
From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org<mailto:elinux-minnowboard-bounces at lists.elinux.org>> on behalf of zahra rahimkhani <zrahimkhani2014 at gmail.com<mailto:zrahimkhani2014 at gmail.com>>
Sent: Monday, April 8, 2019 11:12:03 AM
To: MinnowBoard Community Email List
Subject: Re: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max


I downloaded  this document
MinnowBoard Max/Turbot 1.00 Release Notes<https://firmware.intel.com/sites/default/files/minnowboard_max-rel_1_00-releasenotes.txt>
and used  this part

HOW TO BUILD (LINUX ENVIRONMENT)
  and compiled it on my system. could you help me how I can solve this error on output of file .bin ?

The message on file bin spi flash was this

MmioConf0[0xFED0E200], MmioPadval[0xFED0E208]
Gpio_S5_4 value is 0x3
Gpio_S5_17 value is 0x2
MultiPlatformGpioTableInit()...

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status)


I find this BoardGpios.c on source .but i dont know how solve it ?

Best regards ,
Zahra



On Sat, Apr 6, 2019 at 11:13 AM zahra rahimkhani <zrahimkhani2014 at gmail.com<mailto:zrahimkhani2014 at gmail.com>> wrote:
Thank you for your reply .
I need Intel  I210/I211 network driver. I used version 0.98 and it shows this message.

Do you think that should change it ?



On Sat, Apr 6, 2019 at 11:00 AM Minnow Ware <MinnowWare at hotmail.com<mailto:MinnowWare at hotmail.com>> wrote:
Hi Zahra,

try that one: https://github.com/MinnowWare/UDK2018-MinnowBoard.

It starts Windows!

It is based on UDK2018 and firmware 1.0 and is created on a Windows PC, installed like that one:
https://github.com/MinnowWare/HowTo-setup-an-UEFI-Development-PC

Why you are using the old FW?
That old FW is not available on the Intel MinnowBoard site anymore!
https://firmware.intel.com/projects/minnowboard-max


Regards,
Kilian

________________________________
From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org<mailto:elinux-minnowboard-bounces at lists.elinux.org>> on behalf of zahra rahimkhani <zrahimkhani2014 at gmail.com<mailto:zrahimkhani2014 at gmail.com>>
Sent: Saturday, April 6, 2019 6:36:45 AM
To: MinnowBoard Development and Community Discussion
Subject: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max

Hello,
I am trying to use   Debug 0.94 Firmware on Minnowboard Max. I use the SPI programmer  to do the initial programming. it shows the follow message.

MmioConf0[0xFED0E200], MmioPadval[0xFED0E208]
Gpio_S5_4 value is 0x3
Gpio_S5_17 value is 0x2
MultiPlatformGpioTableInit()...

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status)


Best regards,
Zahra

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20190409/d8a97ebb/attachment.html>