[MinnowBoard] problem with 0.94 firmware for Minnowboard Max

zahra rahimkhani zrahimkhani2014 at gmail.com
Mon Apr 8 09:12:03 UTC 2019


I downloaded  this document
MinnowBoard Max/Turbot 1.00 Release Notes
<https://firmware.intel.com/sites/default/files/minnowboard_max-rel_1_00-releasenotes.txt>
and used  this part

HOW TO BUILD (LINUX ENVIRONMENT)

  and compiled it on my system. could you help me how I can solve this
error on output of file .bin ?

The message on file bin spi flash was this

MmioConf0[0xFED0E200], MmioPadval[0xFED0E208]
Gpio_S5_4 value is 0x3
Gpio_S5_17 value is 0x2
MultiPlatformGpioTableInit()...

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT
m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185):
!EFI_ERROR (Status)


I find this BoardGpios.c on source .but i dont know how solve it ?

Best regards ,
Zahra



On Sat, Apr 6, 2019 at 11:13 AM zahra rahimkhani <zrahimkhani2014 at gmail.com>
wrote:

> Thank you for your reply .
> I need Intel  I210/I211 network driver. I used version 0.98 and it shows
> this message.
>
> Do you think that should change it ?
>
>
>
> On Sat, Apr 6, 2019 at 11:00 AM Minnow Ware <MinnowWare at hotmail.com>
> wrote:
>
>> Hi Zahra,
>>
>>
>>
>> try that one: https://github.com/MinnowWare/UDK2018-MinnowBoard.
>>
>>
>>
>> It starts Windows!
>>
>>
>>
>> It is based on UDK2018 and firmware 1.0 and is created on a Windows PC,
>> installed like that one:
>>
>> https://github.com/MinnowWare/HowTo-setup-an-UEFI-Development-PC
>>
>>
>>
>> Why you are using the old FW?
>>
>> That old FW is not available on the Intel MinnowBoard site anymore!
>>
>> https://firmware.intel.com/projects/minnowboard-max
>>
>>
>>
>>
>>
>> Regards,
>>
>> Kilian
>>
>>
>> ------------------------------
>> *From:* elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org>
>> on behalf of zahra rahimkhani <zrahimkhani2014 at gmail.com>
>> *Sent:* Saturday, April 6, 2019 6:36:45 AM
>> *To:* MinnowBoard Development and Community Discussion
>> *Subject:* [MinnowBoard] problem with 0.94 firmware for Minnowboard Max
>>
>> Hello,
>> I am trying to use   Debug 0.94 Firmware on Minnowboard Max. I use the
>> SPI programmer  to do the initial programming. it shows the follow message.
>>
>> MmioConf0[0xFED0E200], MmioPadval[0xFED0E208]
>> Gpio_S5_4 value is 0x3
>> Gpio_S5_17 value is 0x2
>> MultiPlatformGpioTableInit()...
>>
>> ASSERT_EFI_ERROR (Status = Not Found)
>> ASSERT
>> m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185):
>> !EFI_ERROR (Status)
>>
>>
>> Best regards,
>> Zahra
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20190408/65592beb/attachment.html>


More information about the elinux-MinnowBoard mailing list