[MinnowBoard] problem with 0.94 firmware for Minnowboard Max

[Minnow Ware]

Hi Zahra,

try that one: https://github.com/MinnowWare/UDK2018-MinnowBoard.

It starts Windows!

It is based on UDK2018 and firmware 1.0 and is created on a Windows PC, installed like that one:
https://github.com/MinnowWare/HowTo-setup-an-UEFI-Development-PC

Why you are using the old FW?
That old FW is not available on the Intel MinnowBoard site anymore!
https://firmware.intel.com/projects/minnowboard-max


Regards,
Kilian

________________________________
From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org> on behalf of zahra rahimkhani <zrahimkhani2014 at gmail.com>
Sent: Saturday, April 6, 2019 6:36:45 AM
To: MinnowBoard Development and Community Discussion
Subject: [MinnowBoard] problem with 0.94 firmware for Minnowboard Max

Hello,
I am trying to use   Debug 0.94 Firmware on Minnowboard Max. I use the SPI programmer  to do the initial programming. it shows the follow message.

MmioConf0[0xFED0E200], MmioPadval[0xFED0E208]
Gpio_S5_4 value is 0x3
Gpio_S5_17 value is 0x2
MultiPlatformGpioTableInit()...

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT m:\Vlv2TbltDevicePkg\Library\MultiPlatformLib\BoardGpios\BoardGpios.c(185): !EFI_ERROR (Status)


Best regards,
Zahra

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20190406/0b5f9b1a/attachment.html>