[MinnowBoard] firmware with Bios for minnowboard max
zahra rahimkhani
zrahimkhani2014 at gmail.com
Thu Jul 12 16:40:41 UTC 2018
Also, if it does not BIOS, I can compile firmware based on this link
https://github.com/tianocore/tianocore.github.io/wiki/EDK-II?
Thank you very much for your time
On Thu, Jul 12, 2018 at 8:59 PM zahra rahimkhani <zrahimkhani2014 at gmail.com>
wrote:
> Thank you very much for this message.
>
>
> 1. How did you perform the upgrade from 0.77 to 0.91?
>
> I used this link for upgrade
> https://minnowboard.org/tutorials/updating-the-firmware
> I typed that commands on shell .
>
> 2.Please explain the “crash” you see after the firmware boot
> message? Is this FreeBSD crashing after it tries to boot, or a different
> error?
> No, it is without FreeBSD, It does not make Shell. I did not see this
> message: EFI shell version.....
>
> 3. Can you use F2/DEL to enter the firmware setup without a
> crash/hang?
> No, when I see this message " Start boot option, Press <F2> or <DEL> to
> enter setup page(5 Sec)...."
> My keyboard does not work and I did not see shell that type new commands
>
> 4. The MinnowBoard Max/Turbot firmware is UEFI only, with no
> legacy BIOS support. Newer versions of FreeBSD have UEFI support.
>
> I need FreeBSD 9.2 It does not UEFI , In the forums, I saw in new
> versions, it has BIOS that in this link for 9.1 it told that it has BIOS.
>
> https://firmware.intel.com/projects/minnowboard-max
>
>
> Thanks
>
>
> On Thu, Jul 12, 2018 at 8:19 PM Richardson, Brian <
> brian.richardson at intel.com> wrote:
>
>>
>> 1. How did you perform the upgrade from 0.77 to 0.91?
>> 2. Please explain the “crash” you see after the firmware boot
>> message? Is this FreeBSD crashing after it tries to boot, or a different
>> error?
>> 3. Can you use F2/DEL to enter the firmware setup without a
>> crash/hang?
>> 4. The MinnowBoard Max/Turbot firmware is UEFI only, with no legacy
>> BIOS support. Newer versions of FreeBSD have UEFI support.
>>
>>
>>
>> Thanks … br
>>
>> ---
>>
>> Brian Richardson, Senior Technical Marketing Engineer, Intel Software
>>
>> brian.richardson at intel.com -- @intel_brian (Twitter & WeChat)
>>
>>
>> https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson
>>
>>
>>
>> *From:* elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org> *On
>> Behalf Of *zahra rahimkhani
>> *Sent:* Thursday, July 12, 2018 5:05 AM
>> *To:* MinnowBoard Development and Community Discussion <
>> elinux-minnowboard at lists.elinux.org>
>> *Subject:* [MinnowBoard] firmware with Bios for minnowboard max
>>
>>
>>
>> Dear Friends
>>
>>
>>
>> I downloaded firmware of MinnowBoard MAX 0.91 64-Bit because I think
>> it have BIOS and I can use freebsd 9.2 that do not support UEFI.
>>
>> I put it on my chip but it show this message .
>>
>> ">>>>Start boot option, Press <F2> or <DEL> to enter setup page(5
>> Sec)....."
>>
>> and crashed . I can not type anything in this stage.
>>
>>
>>
>> I would be grateful if you let me know how solve it ?
>>
>> My board had version 0.77 before.
>>
>>
>>
>> Best wishes,
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20180712/2c24f532/attachment.html>
More information about the elinux-MinnowBoard
mailing list