[MinnowBoard] firmware with Bios for minnowboard max

[Richardson, Brian]

  1.  How did you perform the upgrade from 0.77 to 0.91?
  2.  Please explain the “crash” you see after the firmware boot message? Is this FreeBSD crashing after it tries to boot, or a different error?
  3.  Can you use F2/DEL to enter the firmware setup without a crash/hang?
  4.  The MinnowBoard Max/Turbot firmware is UEFI only, with no legacy BIOS support. Newer versions of FreeBSD have UEFI support.

Thanks … br
---
Brian Richardson, Senior Technical Marketing Engineer, Intel Software
brian.richardson at intel.com<mailto:brian.richardson at intel.com> -- @intel_brian (Twitter & WeChat)
https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson

From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org> On Behalf Of zahra rahimkhani
Sent: Thursday, July 12, 2018 5:05 AM
To: MinnowBoard Development and Community Discussion <elinux-minnowboard at lists.elinux.org>
Subject: [MinnowBoard] firmware with Bios for minnowboard max

Dear Friends

I downloaded firmware of    MinnowBoard MAX 0.91 64-Bit because I think it have BIOS and I can use freebsd 9.2 that do not support UEFI.
I put it on my chip but it show this message .
">>>>Start boot option, Press <F2> or <DEL> to enter setup page(5 Sec)....."
and crashed . I can not type anything in  this stage.

I would be grateful if you let me know how solve it ?
My board had version 0.77 before.

Best wishes,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20180712/6752fb93/attachment.html>