[MinnowBoard] repair minnowboard power supply
W Paul Mills
W.P.Mills at WPMills.com
Sat Mar 25 00:15:24 UTC 2017
<https://www.arrow.com/en/products/nct3012str/nuvoton-technology>
On 03/24/2017 07:05 PM, Douglas Kryder wrote:
> i do have some spare NCT3012S which came from digikey when i had the
> same problem.
>
> On Fri, Mar 24, 2017 at 4:30 PM, Patrick Mulder
> <mulder.patrick at gmail.com <mailto:mulder.patrick at gmail.com>> wrote:
>
> Thanks! Yes, i could measure the voltage out of U35 is 0V with input
> 5V, so, indeed it's the problem.
>
> One sub problem is actually sourcing the Nuvoton part:
>
> http://media.digikey.com/pdf/Data%20Sheets/Nuvoton%20PDFs/NCT3012S_RevA0.pdf
> <http://media.digikey.com/pdf/Data%20Sheets/Nuvoton%20PDFs/NCT3012S_RevA0.pdf>
>
> I see Nuvoton is a Taiwanese company; trying to get in touch with a
> local supplier.
>
>
> On Fri, Mar 24, 2017 at 11:57 PM, Douglas Kryder <dkryder at gmail.com
> <mailto:dkryder at gmail.com>> wrote:
>
> yes, it is U35 which goes bad. it takes some soldering skills to
> replace it.
>
> On Fri, Mar 24, 2017 at 1:54 PM, Krau, Michael P
> <michael.p.krau at intel.com <mailto:michael.p.krau at intel.com>> wrote:
>
> If I remember correctly, (from back in the early days, when
> this was a more common event):____
>
> __ __
>
> The schematic page 22 is of more value. I believe when
> 12vts is applied, the chip U35 was the first (and usually
> only) part to go south. ____
>
> __ __
>
> Though there should be some discussion of this in earlier
> threads (about 2 + years ago). ____
>
> __ __
>
> Sincerely,____
>
> __ __
>
> Michael Krau____
>
> ____
>
> *From:*elinux-MinnowBoard
> [mailto:elinux-minnowboard-bounces at lists.elinux.org
> <mailto:elinux-minnowboard-bounces at lists.elinux.org>] *On
> Behalf Of *Patrick Mulder
> *Sent:* Friday, March 24, 2017 1:04 PM
> *To:* elinux-minnowboard at lists.elinux.org
> <mailto:elinux-minnowboard at lists.elinux.org>
> *Subject:* [MinnowBoard] repair minnowboard power supply____
>
> __ __
>
> Hello,____
>
> __ __
>
> unfortunately, I applied 12V instead of 5V on the DC jack.____
>
> __ __
>
> Now, only 1 of 2 diodes is lightning up.____
>
> __ __
>
> I am looking at:____
>
> __ __
>
> http://wiki.minnowboard.org/images/b/bd/Minnowboard_Turbot_X205_Sch.pdf
> <http://wiki.minnowboard.org/images/b/bd/Minnowboard_Turbot_X205_Sch.pdf>____
>
> __ __
>
> p. 29:____
>
> __ __
>
> 5 V DC --> NMOS and Switching supply . Not sure where to
> look for the broken IC from this. What could I do to repair
> the board?____
>
> __ __
>
> Thanks a lot!____
>
> __ __
>
> Patrick____
>
> __ __
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
--
/**********************************
* W. Paul Mills - Topeka, KS, USA *
**********************************/
More information about the elinux-MinnowBoard
mailing list