[MinnowBoard] Board ID

Richardson, Brian brian.richardson at intel.com
Thu Feb 2 20:12:08 UTC 2017


Here is info on how to get the MinnowBoard Max/Turbot source ...
https://firmware.intel.com/projects/minnowboard-max 
https://firmware.intel.com/sites/default/files/MinnowBoard_MAX-Rel_0_94-ReleaseNotes.txt 

Thanks … br
---
Brian Richardson, Senior Technical Marketing Engineer, Intel Software
brian.richardson at intel.com -- @intel_Brian (Twitter & WeChat)
https://software.intel.com/en-us/meet-the-developers/evangelists/team/brian-richardson 


-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Grigory V. Korotov
Sent: Thursday, February 2, 2017 2:12 PM
To: elinux-minnowboard at lists.elinux.org
Subject: Re: [MinnowBoard] Board ID

Hello Brian.
Thanks for forwarding.
I have some updates.
I turned off realtek by removing 25Mhz XTAL from original MAX2.
And both 32 and 64 bit UEFI stops showing ID strings.
I think UEFI stops showing ID when it cant find UNDI device.
As we know i210 have only 64bit UNDI and as a result my custom board shows ID only with 64bit EFI.
And when i disabled realtek on Minnow2 it stops showing in both cases because there is no UNDI device at all.
Could someone points me start point to start source editing to resolve this problem?

Grigory


02.02.2017 20:02, Ottaway, Brian R пишет:
> Hello Grigory. Going with the i210 makes sense for AVB, p-timing, and such. I copied your issue to Github, link below, and flagged it to the person I think will have input.
>
> https://github.com/MinnowBoard-org/bugs-and-help/issues/14
>
> -Brian
>
> -----Original Message-----
> From: elinux-MinnowBoard 
> [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of 
> Grigory V. Korotov
> Sent: Thursday, February 02, 2017 4:08 AM
> To: MinnowBoard Community Email List 
> <elinux-minnowboard at lists.elinux.org>
> Subject: [MinnowBoard] Board ID
>
> Hi all.
>
> I built my own board based on MAX 2.
> On the second revision of my board a have replaced realtek LAN to intel i210.
> By now i have issue.
> If i build 94 version of firmware in 64 bit mode everything is okay.
> If i build firmware using 32 bit mode there is some problems.
> In main BIOS setup screen there is no board information in left upper corner of the screen.
> Also when using windows software(AIDA etc) to identify board manufacturer it shows me nothing. No Manufacturer ID no board ID and even no CPU microcode revision.
> I did some investigations and found that when firmware runs in 32 bit mode it does not enter MiscSubclassDriverEntryPoint function which calls function AddSmbiosManuCallback which initialize Platform information using mPlatformInfo variable.
>
> I tried earlier versions of firmware and results is same.
>
> There is no problems in 64 or 32 bit mode on previous board with realtek LAN. This is only difference.
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard


_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard


More information about the elinux-MinnowBoard mailing list