[MinnowBoard] Board ID

Ottaway, Brian R brian.r.ottaway at intel.com
Thu Feb 2 17:02:03 UTC 2017

Hello Grigory. Going with the i210 makes sense for AVB, p-timing, and such. I copied your issue to Github, link below, and flagged it to the person I think will have input. 



-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Grigory V. Korotov
Sent: Thursday, February 02, 2017 4:08 AM
To: MinnowBoard Community Email List <elinux-minnowboard at lists.elinux.org>
Subject: [MinnowBoard] Board ID

Hi all.

I built my own board based on MAX 2.
On the second revision of my board a have replaced realtek LAN to intel i210.
By now i have issue.
If i build 94 version of firmware in 64 bit mode everything is okay.
If i build firmware using 32 bit mode there is some problems.
In main BIOS setup screen there is no board information in left upper corner of the screen.
Also when using windows software(AIDA etc) to identify board manufacturer it shows me nothing. No Manufacturer ID no board ID and even no CPU microcode revision.
I did some investigations and found that when firmware runs in 32 bit mode it does not enter MiscSubclassDriverEntryPoint function which calls function AddSmbiosManuCallback which initialize Platform information using mPlatformInfo variable.

I tried earlier versions of firmware and results is same.

There is no problems in 64 or 32 bit mode on previous board with realtek LAN. This is only difference.
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org

More information about the elinux-MinnowBoard mailing list