[MinnowBoard] Minnownoard max design with Gerber fils and install it
zahra rahimkhani
zrahimkhani2014 at gmail.com
Mon Nov 14 11:35:30 UTC 2016
I still can not install my board correctlly
On Sat, Nov 12, 2016 at 5:56 AM, zahra rahimkhani <zrahimkhani2014 at gmail.com
> wrote:
> can you suggest a new solve ?
>
> On Thu, Nov 10, 2016 at 9:58 AM, zahra rahimkhani <
> zrahimkhani2014 at gmail.com> wrote:
>
>> Also, for install XDP , it is suitable follow pin ?
>>
>> XDP_H_TDI
>> XDP_H_TMS
>> XDP_H_TRSTB
>> XDP_H_TCK
>> XDP_H_TDO
>>
>> On Thu, Nov 10, 2016 at 8:59 AM, zahra rahimkhani <
>> zrahimkhani2014 at gmail.com> wrote:
>>
>>> Dear John
>>>
>>> I test Keristal clock and SPI FLASH clock .
>>> but it have not output pulse.
>>>
>>> Also i want to replace Soc but i have not stencil now.
>>> Your opinion it is necessary replace Soc.
>>>
>>> Thank you
>>>
>>> On Tue, Nov 8, 2016 at 3:17 PM, zahra rahimkhani <
>>> zrahimkhani2014 at gmail.com> wrote:
>>>
>>>> John
>>>>
>>>> I do not use EEPROM , do you think is it important ?
>>>> How check to short components?
>>>> Thank you
>>>>
>>>>
>>>> On Tue, Nov 8, 2016 at 2:23 PM, zahra rahimkhani <
>>>> zrahimkhani2014 at gmail.com> wrote:
>>>>
>>>>> John
>>>>>
>>>>> Thank you for your response.
>>>>>
>>>>> I will replace my soc with a new soc from a Minnowboard Max board
>>>>> that i had bought in the past.
>>>>> Also I use spi flash on Minnowboard Max board and get it on my
>>>>> board.
>>>>> your opinion, is it right ?
>>>>>
>>>>> Also LEDs turn on without delay. LEDs turn on immediately .RESET key
>>>>> do not work .
>>>>>
>>>>> I programmed spi flash with firmware debug but serial port do not
>>>>> show something .
>>>>>
>>>>>
>>>>> On Tue, Nov 8, 2016 at 3:49 AM, John Hawley <john.hawley at intel.com>
>>>>> wrote:
>>>>>
>>>>>> Ok that looks like it's the E3825, so that looks like it should
>>>>>> alleviate that as an issue (wanted to make sure that it was a
>>>>>> compatible
>>>>>> part, just on the off chance it wasn't)
>>>>>>
>>>>>> Memory part, at first glance anyway, looks right. I'd have to go do a
>>>>>> lot more digging to be 100% sure there.
>>>>>>
>>>>>> Storage processor vs. mobile processor is a little odd, I'd need some
>>>>>> more context on what you are referring to. The chips are are using
>>>>>> are
>>>>>> based on the Baytrail-I skus, or the industrial version of the skus.
>>>>>> There are some other Baytrail skus, but most of them are not footprint
>>>>>> compatible with the Baytrail-I (can't remember which one off hand).
>>>>>> Pretty sure, given the part number you last gave, you've got the
>>>>>> right SoC.
>>>>>>
>>>>>> Have you tried flashing the debug firmware in and seeing if anything
>>>>>> comes out of the serial port?
>>>>>>
>>>>>> Unless something is horribly shorted, you are getting both LEDs so the
>>>>>> SoC should be online, but you are clearly just not getting past
>>>>>> something in the early start-up, and it's hard to tell, or even guess,
>>>>>> without something further.
>>>>>>
>>>>>> So here's my suggested next steps:
>>>>>> - If you can flash the debug firmware on the board, and see if you get
>>>>>> anything out of the serial port (J4)
>>>>>>
>>>>>> - If you don't get anything out of the serial port with the debug
>>>>>> firmware the only other step I can reasonably think of is to go and
>>>>>> snag
>>>>>> a full IDP/XDP (plus the debug lure) and start debugging it that way,
>>>>>> but this is not an inexpensive way to go, so I would start with trying
>>>>>> the debug firmware, and let me see what else I can find in the mean
>>>>>> time.
>>>>>>
>>>>>> - John 'Warthog9' Hawley
>>>>>>
>>>>>> On 11/06/2016 10:08 PM, zahra rahimkhani wrote:
>>>>>> > Dear john
>>>>>> >
>>>>>> > Part number soc is FH8065301567313 SR1X9
>>>>>> > can you suggest a solve?
>>>>>> >
>>>>>> > Thank you
>>>>>> >
>>>>>> > On Sun, Nov 6, 2016 at 2:08 PM, zahra rahimkhani
>>>>>> > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>>
>>>>>> wrote:
>>>>>> >
>>>>>> > john
>>>>>> >
>>>>>> > why it is very important about part number soc ?
>>>>>> >
>>>>>> > i bought it from a sale, she is free today ,i send information
>>>>>> it
>>>>>> > tomorrow.
>>>>>> >
>>>>>> > Thank you
>>>>>> >
>>>>>> > On Sun, Nov 6, 2016 at 11:00 AM, John 'Warthog9' Hawley
>>>>>> > <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>>
>>>>>> wrote:
>>>>>> >
>>>>>> > Firmware is from that location, just snag the debug version
>>>>>> and
>>>>>> > flash that.
>>>>>> >
>>>>>> > As for the link, I need where you bought the SoC itself
>>>>>> from, as the
>>>>>> > numbers you've provided don't match anything I can track
>>>>>> down.
>>>>>> >
>>>>>> > - John 'Warthog9' Hawley
>>>>>> >
>>>>>> > On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
>>>>>> > > john
>>>>>> > > can you check link?
>>>>>> > > and firmware ?
>>>>>> > >
>>>>>> > > Thank you
>>>>>> > >
>>>>>> > > On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
>>>>>> > > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.
>>>>>> com>
>>>>>> > <mailto:zrahimkhani2014 at gmail.com
>>>>>> > <mailto:zrahimkhani2014 at gmail.com>>> wrote:
>>>>>> > >
>>>>>> > > i used this link , it have Gerber files for v2
>>>>>> > >
>>>>>> > > http://wiki.minnowboard.org/MinnowBoard_MAX
>>>>>> > <http://wiki.minnowboard.org/MinnowBoard_MAX>
>>>>>> > > <http://wiki.minnowboard.org/MinnowBoard_MAX
>>>>>> > <http://wiki.minnowboard.org/MinnowBoard_MAX>>
>>>>>> > >
>>>>>> > > Also , I used this link for firmware
>>>>>> > >
>>>>>> > > https://firmware.intel.com/projects/minnowboard-max
>>>>>> > <https://firmware.intel.com/projects/minnowboard-max>
>>>>>> > > <https://firmware.intel.com/projects/minnowboard-max
>>>>>> > <https://firmware.intel.com/projects/minnowboard-max>>
>>>>>> > >
>>>>>> > > Thank you
>>>>>> > >
>>>>>> > >
>>>>>> > >
>>>>>> > > On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9'
>>>>>> Hawley
>>>>>> > > <warthog9 at eaglescrag.net <mailto:
>>>>>> warthog9 at eaglescrag.net>
>>>>>> > <mailto:warthog9 at eaglescrag.net
>>>>>> > <mailto:warthog9 at eaglescrag.net>>> wrote:
>>>>>> > >
>>>>>> > > Can you give me a link to the Baytrail you used,
>>>>>> the number you list
>>>>>> > > doesn't come up on anything useful.
>>>>>> > >
>>>>>> > > As for debug firmware you'll need to flash it in
>>>>>> just as you did
>>>>>> > > with
>>>>>> > > the stock firmware, you can snag it from the same
>>>>>> place you
>>>>>> > > snagged the
>>>>>> > > default firmware (which is up on the Intel
>>>>>> firmware site)
>>>>>> > >
>>>>>> > > - John
>>>>>> > >
>>>>>> > > On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
>>>>>> > > > I want to check clock for Ram and spi flash ?
>>>>>> > > >
>>>>>> > > > do you agree or disagree ?
>>>>>> > > >
>>>>>> > > > Thank you so much
>>>>>> > > >
>>>>>> > > > On Thu, Nov 3, 2016 at 11:26 AM, zahra
>>>>>> rahimkhani
>>>>>> > > > <zrahimkhani2014 at gmail.com <mailto:
>>>>>> zrahimkhani2014 at gmail.com>
>>>>>> > <mailto:zrahimkhani2014 at gmail.com
>>>>>> > <mailto:zrahimkhani2014 at gmail.com>>
>>>>>> > > <mailto:zrahimkhani2014 at gmail.com
>>>>>> > <mailto:zrahimkhani2014 at gmail.com>
>>>>>> > > <mailto:zrahimkhani2014 at gmail.com <mailto:
>>>>>> zrahimkhani2014 at gmail.com>>>>
>>>>>> > wrote:
>>>>>> > > >
>>>>>> > > > -I use the Max Gerber files
>>>>>> > > > -The both of Leds are on but them have not
>>>>>> delay when they are
>>>>>> > > > turning on .
>>>>>> > > > -It was got with BJA device.
>>>>>> > > > _I used BAYTRAIL-IFH8065301567311.
>>>>>> > > > -Nothing do not come on serial port
>>>>>> > > > -I do not know how debug frimwear .
>>>>>> > > > -I can not sure about BGA components How
>>>>>> check them ?
>>>>>> > > >
>>>>>> > > > On 03/11/2016 10:49 AM, "John 'Warthog9'
>>>>>> Hawley"
>>>>>> > > > <warthog9 at eaglescrag.net <mailto:
>>>>>> warthog9 at eaglescrag.net>
>>>>>> > <mailto:warthog9 at eaglescrag.net <mailto:
>>>>>> warthog9 at eaglescrag.net>>
>>>>>> > > <mailto:warthog9 at eaglescrag.net
>>>>>> > <mailto:warthog9 at eaglescrag.net>
>>>>>> > > <mailto:warthog9 at eaglescrag.net
>>>>>> > <mailto:warthog9 at eaglescrag.net>>>> wrote:
>>>>>> > > >
>>>>>> > > > - Did you use the MAX or the Turbot
>>>>>> Gerber
>>>>>> > files?
>>>>>> > > > - Do either of the LEDs (D1, D2) come on
>>>>>> > when power is applied?
>>>>>> > > > - Did you get the SoC itself placed
>>>>>> correctly?
>>>>>> > > > - Which SoC are you using?
>>>>>> > > > - Which RAM chips are you using?
>>>>>> > > > - Does anything come out on the serial
>>>>>> port
>>>>>> > during boot?
>>>>>> > > > - Have you tried with the debug
>>>>>> firmware?
>>>>>> > > > - Are you sure there isn't a short on
>>>>>> the
>>>>>> > pcb itself?
>>>>>> > > >
>>>>>> > > > If you can answer that it should get us
>>>>>> a
>>>>>> > good starting point on
>>>>>> > > > trying to help you with what you are
>>>>>> seeing.
>>>>>> > > >
>>>>>> > > > - John 'Warthog9' Hawley
>>>>>> > > >
>>>>>> > > > On 11/3/2016 12:01 AM, zahra rahimkhani
>>>>>> wrote:
>>>>>> > > >
>>>>>> > > > Hello
>>>>>> > > > I make a minnowboard max with use
>>>>>> from
>>>>>> > GERBER files on its
>>>>>> > > > website .
>>>>>> > > >
>>>>>> > > > but it do not work . i tested all of
>>>>>> > voltages . they are
>>>>>> > > > correct .
>>>>>> > > > also freamwear was programmed by a
>>>>>> > programmer on chip 1.8 v
>>>>>> > > >
>>>>>> > > > but it is not work . please suggest
>>>>>> a solve?
>>>>>> > > >
>>>>>> > > > thank you
>>>>>> > > >
>>>>>> > > >
>>>>>> > > >
>>>>>> > _______________________________________________
>>>>>> > > > elinux-MinnowBoard mailing list
>>>>>> > > > elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>>> > > >
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>>
>>>>>> > > >
>>>>>> > > http://lists.elinux.org/mailma
>>>>>> n/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > > <http://lists.elinux.org/mail
>>>>>> man/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>>
>>>>>> > > > <http://lists.elinux.org/mail
>>>>>> man/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > > <http://lists.elinux.org/mail
>>>>>> man/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>>>
>>>>>> > > >
>>>>>> > > > _____________________________
>>>>>> __________________
>>>>>> > > > elinux-MinnowBoard mailing list
>>>>>> > > > elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>>> > > > <mailto:elinux-MinnowBoard at li
>>>>>> sts.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>>
>>>>>> > > >
>>>>>> > >
>>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > >
>>>>>> > <http://lists.elinux.org/mailm
>>>>>> an/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>>
>>>>>> > > >
>>>>>> > >
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > >
>>>>>> > <http://lists.elinux.org/mailm
>>>>>> an/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>>>
>>>>>> > > >
>>>>>> > > >
>>>>>> > > >
>>>>>> > > >
>>>>>> > > > _______________________________________________
>>>>>> > > > elinux-MinnowBoard mailing list
>>>>>> > > > elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>>> > > >
>>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > >
>>>>>> > <http://lists.elinux.org/mailm
>>>>>> an/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>>
>>>>>> > > >
>>>>>> > >
>>>>>> > > _______________________________________________
>>>>>> > > elinux-MinnowBoard mailing list
>>>>>> > > elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>>> > >
>>>>>> > http://lists.elinux.org/mailma
>>>>>> n/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > >
>>>>>> > <http://lists.elinux.org/mailm
>>>>>> an/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>>
>>>>>> > >
>>>>>> > >
>>>>>> > >
>>>>>> > >
>>>>>> > >
>>>>>> > > _______________________________________________
>>>>>> > > elinux-MinnowBoard mailing list
>>>>>> > > elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > > http://lists.elinux.org/mailma
>>>>>> n/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> > >
>>>>>> >
>>>>>> > _______________________________________________
>>>>>> > elinux-MinnowBoard mailing list
>>>>>> > elinux-MinnowBoard at lists.elinux.org
>>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboar
>>>>>> d>
>>>>>> >
>>>>>> >
>>>>>> >
>>>>>> >
>>>>>> >
>>>>>> > _______________________________________________
>>>>>> > elinux-MinnowBoard mailing list
>>>>>> > elinux-MinnowBoard at lists.elinux.org
>>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>> >
>>>>>> _______________________________________________
>>>>>> elinux-MinnowBoard mailing list
>>>>>> elinux-MinnowBoard at lists.elinux.org
>>>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161114/2e92c795/attachment-0001.html>
More information about the elinux-MinnowBoard
mailing list