[MinnowBoard] Minnownoard max design with Gerber fils and install it
zahra rahimkhani
zrahimkhani2014 at gmail.com
Sat Nov 12 02:26:42 UTC 2016
can you suggest a new solve ?
On Thu, Nov 10, 2016 at 9:58 AM, zahra rahimkhani <zrahimkhani2014 at gmail.com
> wrote:
> Also, for install XDP , it is suitable follow pin ?
>
> XDP_H_TDI
> XDP_H_TMS
> XDP_H_TRSTB
> XDP_H_TCK
> XDP_H_TDO
>
> On Thu, Nov 10, 2016 at 8:59 AM, zahra rahimkhani <
> zrahimkhani2014 at gmail.com> wrote:
>
>> Dear John
>>
>> I test Keristal clock and SPI FLASH clock .
>> but it have not output pulse.
>>
>> Also i want to replace Soc but i have not stencil now.
>> Your opinion it is necessary replace Soc.
>>
>> Thank you
>>
>> On Tue, Nov 8, 2016 at 3:17 PM, zahra rahimkhani <
>> zrahimkhani2014 at gmail.com> wrote:
>>
>>> John
>>>
>>> I do not use EEPROM , do you think is it important ?
>>> How check to short components?
>>> Thank you
>>>
>>>
>>> On Tue, Nov 8, 2016 at 2:23 PM, zahra rahimkhani <
>>> zrahimkhani2014 at gmail.com> wrote:
>>>
>>>> John
>>>>
>>>> Thank you for your response.
>>>>
>>>> I will replace my soc with a new soc from a Minnowboard Max board
>>>> that i had bought in the past.
>>>> Also I use spi flash on Minnowboard Max board and get it on my
>>>> board.
>>>> your opinion, is it right ?
>>>>
>>>> Also LEDs turn on without delay. LEDs turn on immediately .RESET key do
>>>> not work .
>>>>
>>>> I programmed spi flash with firmware debug but serial port do not show
>>>> something .
>>>>
>>>>
>>>> On Tue, Nov 8, 2016 at 3:49 AM, John Hawley <john.hawley at intel.com>
>>>> wrote:
>>>>
>>>>> Ok that looks like it's the E3825, so that looks like it should
>>>>> alleviate that as an issue (wanted to make sure that it was a
>>>>> compatible
>>>>> part, just on the off chance it wasn't)
>>>>>
>>>>> Memory part, at first glance anyway, looks right. I'd have to go do a
>>>>> lot more digging to be 100% sure there.
>>>>>
>>>>> Storage processor vs. mobile processor is a little odd, I'd need some
>>>>> more context on what you are referring to. The chips are are using are
>>>>> based on the Baytrail-I skus, or the industrial version of the skus.
>>>>> There are some other Baytrail skus, but most of them are not footprint
>>>>> compatible with the Baytrail-I (can't remember which one off hand).
>>>>> Pretty sure, given the part number you last gave, you've got the right
>>>>> SoC.
>>>>>
>>>>> Have you tried flashing the debug firmware in and seeing if anything
>>>>> comes out of the serial port?
>>>>>
>>>>> Unless something is horribly shorted, you are getting both LEDs so the
>>>>> SoC should be online, but you are clearly just not getting past
>>>>> something in the early start-up, and it's hard to tell, or even guess,
>>>>> without something further.
>>>>>
>>>>> So here's my suggested next steps:
>>>>> - If you can flash the debug firmware on the board, and see if you get
>>>>> anything out of the serial port (J4)
>>>>>
>>>>> - If you don't get anything out of the serial port with the debug
>>>>> firmware the only other step I can reasonably think of is to go and
>>>>> snag
>>>>> a full IDP/XDP (plus the debug lure) and start debugging it that way,
>>>>> but this is not an inexpensive way to go, so I would start with trying
>>>>> the debug firmware, and let me see what else I can find in the mean
>>>>> time.
>>>>>
>>>>> - John 'Warthog9' Hawley
>>>>>
>>>>> On 11/06/2016 10:08 PM, zahra rahimkhani wrote:
>>>>> > Dear john
>>>>> >
>>>>> > Part number soc is FH8065301567313 SR1X9
>>>>> > can you suggest a solve?
>>>>> >
>>>>> > Thank you
>>>>> >
>>>>> > On Sun, Nov 6, 2016 at 2:08 PM, zahra rahimkhani
>>>>> > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>>
>>>>> wrote:
>>>>> >
>>>>> > john
>>>>> >
>>>>> > why it is very important about part number soc ?
>>>>> >
>>>>> > i bought it from a sale, she is free today ,i send information it
>>>>> > tomorrow.
>>>>> >
>>>>> > Thank you
>>>>> >
>>>>> > On Sun, Nov 6, 2016 at 11:00 AM, John 'Warthog9' Hawley
>>>>> > <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>>
>>>>> wrote:
>>>>> >
>>>>> > Firmware is from that location, just snag the debug version
>>>>> and
>>>>> > flash that.
>>>>> >
>>>>> > As for the link, I need where you bought the SoC itself
>>>>> from, as the
>>>>> > numbers you've provided don't match anything I can track
>>>>> down.
>>>>> >
>>>>> > - John 'Warthog9' Hawley
>>>>> >
>>>>> > On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
>>>>> > > john
>>>>> > > can you check link?
>>>>> > > and firmware ?
>>>>> > >
>>>>> > > Thank you
>>>>> > >
>>>>> > > On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
>>>>> > > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.
>>>>> com>
>>>>> > <mailto:zrahimkhani2014 at gmail.com
>>>>> > <mailto:zrahimkhani2014 at gmail.com>>> wrote:
>>>>> > >
>>>>> > > i used this link , it have Gerber files for v2
>>>>> > >
>>>>> > > http://wiki.minnowboard.org/MinnowBoard_MAX
>>>>> > <http://wiki.minnowboard.org/MinnowBoard_MAX>
>>>>> > > <http://wiki.minnowboard.org/MinnowBoard_MAX
>>>>> > <http://wiki.minnowboard.org/MinnowBoard_MAX>>
>>>>> > >
>>>>> > > Also , I used this link for firmware
>>>>> > >
>>>>> > > https://firmware.intel.com/projects/minnowboard-max
>>>>> > <https://firmware.intel.com/projects/minnowboard-max>
>>>>> > > <https://firmware.intel.com/projects/minnowboard-max
>>>>> > <https://firmware.intel.com/projects/minnowboard-max>>
>>>>> > >
>>>>> > > Thank you
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > > On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9' Hawley
>>>>> > > <warthog9 at eaglescrag.net <mailto:
>>>>> warthog9 at eaglescrag.net>
>>>>> > <mailto:warthog9 at eaglescrag.net
>>>>> > <mailto:warthog9 at eaglescrag.net>>> wrote:
>>>>> > >
>>>>> > > Can you give me a link to the Baytrail you used,
>>>>> the number you list
>>>>> > > doesn't come up on anything useful.
>>>>> > >
>>>>> > > As for debug firmware you'll need to flash it in
>>>>> just as you did
>>>>> > > with
>>>>> > > the stock firmware, you can snag it from the same
>>>>> place you
>>>>> > > snagged the
>>>>> > > default firmware (which is up on the Intel
>>>>> firmware site)
>>>>> > >
>>>>> > > - John
>>>>> > >
>>>>> > > On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
>>>>> > > > I want to check clock for Ram and spi flash ?
>>>>> > > >
>>>>> > > > do you agree or disagree ?
>>>>> > > >
>>>>> > > > Thank you so much
>>>>> > > >
>>>>> > > > On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani
>>>>> > > > <zrahimkhani2014 at gmail.com <mailto:
>>>>> zrahimkhani2014 at gmail.com>
>>>>> > <mailto:zrahimkhani2014 at gmail.com
>>>>> > <mailto:zrahimkhani2014 at gmail.com>>
>>>>> > > <mailto:zrahimkhani2014 at gmail.com
>>>>> > <mailto:zrahimkhani2014 at gmail.com>
>>>>> > > <mailto:zrahimkhani2014 at gmail.com <mailto:
>>>>> zrahimkhani2014 at gmail.com>>>>
>>>>> > wrote:
>>>>> > > >
>>>>> > > > -I use the Max Gerber files
>>>>> > > > -The both of Leds are on but them have not
>>>>> delay when they are
>>>>> > > > turning on .
>>>>> > > > -It was got with BJA device.
>>>>> > > > _I used BAYTRAIL-IFH8065301567311.
>>>>> > > > -Nothing do not come on serial port
>>>>> > > > -I do not know how debug frimwear .
>>>>> > > > -I can not sure about BGA components How
>>>>> check them ?
>>>>> > > >
>>>>> > > > On 03/11/2016 10:49 AM, "John 'Warthog9'
>>>>> Hawley"
>>>>> > > > <warthog9 at eaglescrag.net <mailto:
>>>>> warthog9 at eaglescrag.net>
>>>>> > <mailto:warthog9 at eaglescrag.net <mailto:
>>>>> warthog9 at eaglescrag.net>>
>>>>> > > <mailto:warthog9 at eaglescrag.net
>>>>> > <mailto:warthog9 at eaglescrag.net>
>>>>> > > <mailto:warthog9 at eaglescrag.net
>>>>> > <mailto:warthog9 at eaglescrag.net>>>> wrote:
>>>>> > > >
>>>>> > > > - Did you use the MAX or the Turbot
>>>>> Gerber
>>>>> > files?
>>>>> > > > - Do either of the LEDs (D1, D2) come on
>>>>> > when power is applied?
>>>>> > > > - Did you get the SoC itself placed
>>>>> correctly?
>>>>> > > > - Which SoC are you using?
>>>>> > > > - Which RAM chips are you using?
>>>>> > > > - Does anything come out on the serial
>>>>> port
>>>>> > during boot?
>>>>> > > > - Have you tried with the debug firmware?
>>>>> > > > - Are you sure there isn't a short on the
>>>>> > pcb itself?
>>>>> > > >
>>>>> > > > If you can answer that it should get us a
>>>>> > good starting point on
>>>>> > > > trying to help you with what you are
>>>>> seeing.
>>>>> > > >
>>>>> > > > - John 'Warthog9' Hawley
>>>>> > > >
>>>>> > > > On 11/3/2016 12:01 AM, zahra rahimkhani
>>>>> wrote:
>>>>> > > >
>>>>> > > > Hello
>>>>> > > > I make a minnowboard max with use
>>>>> from
>>>>> > GERBER files on its
>>>>> > > > website .
>>>>> > > >
>>>>> > > > but it do not work . i tested all of
>>>>> > voltages . they are
>>>>> > > > correct .
>>>>> > > > also freamwear was programmed by a
>>>>> > programmer on chip 1.8 v
>>>>> > > >
>>>>> > > > but it is not work . please suggest
>>>>> a solve?
>>>>> > > >
>>>>> > > > thank you
>>>>> > > >
>>>>> > > >
>>>>> > > >
>>>>> > _______________________________________________
>>>>> > > > elinux-MinnowBoard mailing list
>>>>> > > > elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>> > > >
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>>
>>>>> > > >
>>>>> > > http://lists.elinux.org/mailma
>>>>> n/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > > <http://lists.elinux.org/mail
>>>>> man/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >>
>>>>> > > > <http://lists.elinux.org/mail
>>>>> man/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > > <http://lists.elinux.org/mail
>>>>> man/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >>>
>>>>> > > >
>>>>> > > > _____________________________
>>>>> __________________
>>>>> > > > elinux-MinnowBoard mailing list
>>>>> > > > elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>> > > > <mailto:elinux-MinnowBoard at li
>>>>> sts.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>>
>>>>> > > >
>>>>> > >
>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > >
>>>>> > <http://lists.elinux.org/mailm
>>>>> an/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >>
>>>>> > > >
>>>>> > >
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > >
>>>>> > <http://lists.elinux.org/mailm
>>>>> an/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >>>
>>>>> > > >
>>>>> > > >
>>>>> > > >
>>>>> > > >
>>>>> > > > _______________________________________________
>>>>> > > > elinux-MinnowBoard mailing list
>>>>> > > > elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>> > > >
>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > >
>>>>> > <http://lists.elinux.org/mailm
>>>>> an/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >>
>>>>> > > >
>>>>> > >
>>>>> > > _______________________________________________
>>>>> > > elinux-MinnowBoard mailing list
>>>>> > > elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>>> > >
>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > >
>>>>> > <http://lists.elinux.org/mailm
>>>>> an/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >>
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > > _______________________________________________
>>>>> > > elinux-MinnowBoard mailing list
>>>>> > > elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > > http://lists.elinux.org/mailma
>>>>> n/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> > >
>>>>> >
>>>>> > _______________________________________________
>>>>> > elinux-MinnowBoard mailing list
>>>>> > elinux-MinnowBoard at lists.elinux.org
>>>>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> > _______________________________________________
>>>>> > elinux-MinnowBoard mailing list
>>>>> > elinux-MinnowBoard at lists.elinux.org
>>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>> >
>>>>> _______________________________________________
>>>>> elinux-MinnowBoard mailing list
>>>>> elinux-MinnowBoard at lists.elinux.org
>>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161112/2bf0ca5e/attachment-0001.html>
More information about the elinux-MinnowBoard
mailing list