[MinnowBoard] Minnownoard max design with Gerber fils and install it
zahra rahimkhani
zrahimkhani2014 at gmail.com
Mon Nov 7 06:08:06 UTC 2016
Dear john
Part number soc is FH8065301567313 SR1X9
can you suggest a solve?
Thank you
On Sun, Nov 6, 2016 at 2:08 PM, zahra rahimkhani <zrahimkhani2014 at gmail.com>
wrote:
> john
>
> why it is very important about part number soc ?
>
> i bought it from a sale, she is free today ,i send information it
> tomorrow.
>
> Thank you
>
> On Sun, Nov 6, 2016 at 11:00 AM, John 'Warthog9' Hawley <
> warthog9 at eaglescrag.net> wrote:
>
>> Firmware is from that location, just snag the debug version and flash
>> that.
>>
>> As for the link, I need where you bought the SoC itself from, as the
>> numbers you've provided don't match anything I can track down.
>>
>> - John 'Warthog9' Hawley
>>
>> On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
>> > john
>> > can you check link?
>> > and firmware ?
>> >
>> > Thank you
>> >
>> > On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
>> > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>> wrote:
>> >
>> > i used this link , it have Gerber files for v2
>> >
>> > http://wiki.minnowboard.org/MinnowBoard_MAX
>> > <http://wiki.minnowboard.org/MinnowBoard_MAX>
>> >
>> > Also , I used this link for firmware
>> >
>> > https://firmware.intel.com/projects/minnowboard-max
>> > <https://firmware.intel.com/projects/minnowboard-max>
>> >
>> > Thank you
>> >
>> >
>> >
>> > On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9' Hawley
>> > <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>> wrote:
>> >
>> > Can you give me a link to the Baytrail you used, the number you
>> list
>> > doesn't come up on anything useful.
>> >
>> > As for debug firmware you'll need to flash it in just as you did
>> > with
>> > the stock firmware, you can snag it from the same place you
>> > snagged the
>> > default firmware (which is up on the Intel firmware site)
>> >
>> > - John
>> >
>> > On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
>> > > I want to check clock for Ram and spi flash ?
>> > >
>> > > do you agree or disagree ?
>> > >
>> > > Thank you so much
>> > >
>> > > On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani
>> > > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>
>> > <mailto:zrahimkhani2014 at gmail.com
>> > <mailto:zrahimkhani2014 at gmail.com>>> wrote:
>> > >
>> > > -I use the Max Gerber files
>> > > -The both of Leds are on but them have not delay when
>> they are
>> > > turning on .
>> > > -It was got with BJA device.
>> > > _I used BAYTRAIL-IFH8065301567311.
>> > > -Nothing do not come on serial port
>> > > -I do not know how debug frimwear .
>> > > -I can not sure about BGA components How check them ?
>> > >
>> > > On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley"
>> > > <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>
>> > <mailto:warthog9 at eaglescrag.net
>> > <mailto:warthog9 at eaglescrag.net>>> wrote:
>> > >
>> > > - Did you use the MAX or the Turbot Gerber files?
>> > > - Do either of the LEDs (D1, D2) come on when power
>> is applied?
>> > > - Did you get the SoC itself placed correctly?
>> > > - Which SoC are you using?
>> > > - Which RAM chips are you using?
>> > > - Does anything come out on the serial port during
>> boot?
>> > > - Have you tried with the debug firmware?
>> > > - Are you sure there isn't a short on the pcb itself?
>> > >
>> > > If you can answer that it should get us a good
>> starting point on
>> > > trying to help you with what you are seeing.
>> > >
>> > > - John 'Warthog9' Hawley
>> > >
>> > > On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
>> > >
>> > > Hello
>> > > I make a minnowboard max with use from GERBER
>> files on its
>> > > website .
>> > >
>> > > but it do not work . i tested all of voltages .
>> they are
>> > > correct .
>> > > also freamwear was programmed by a programmer on
>> chip 1.8 v
>> > >
>> > > but it is not work . please suggest a solve?
>> > >
>> > > thank you
>> > >
>> > >
>> > > _______________________________________________
>> > > elinux-MinnowBoard mailing list
>> > > elinux-MinnowBoard at lists.elinux.org
>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>> > >
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>> > > <http://lists.elinux.org/mail
>> man/listinfo/elinux-minnowboard
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>> > >
>> > > _______________________________________________
>> > > elinux-MinnowBoard mailing list
>> > > elinux-MinnowBoard at lists.elinux.org
>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>> > > <mailto:elinux-MinnowBoard at lists.elinux.org
>> > <mailto:elinux-MinnowBoard at lists.elinux.org>>
>> > >
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>> > >
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>> > >
>> > >
>> > >
>> > >
>> > > _______________________________________________
>> > > elinux-MinnowBoard mailing list
>> > > elinux-MinnowBoard at lists.elinux.org
>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>> > > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>> > >
>> >
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org
>> > <mailto:elinux-MinnowBoard at lists.elinux.org>
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>> >
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161107/13a18f56/attachment.html>
More information about the elinux-MinnowBoard
mailing list