[MinnowBoard] Minnownoard max design with Gerber fils and install it
John 'Warthog9' Hawley
warthog9 at eaglescrag.net
Sun Nov 6 07:30:45 UTC 2016
Firmware is from that location, just snag the debug version and flash that.
As for the link, I need where you bought the SoC itself from, as the
numbers you've provided don't match anything I can track down.
- John 'Warthog9' Hawley
On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
> john
> can you check link?
> and firmware ?
>
> Thank you
>
> On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
> <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>> wrote:
>
> i used this link , it have Gerber files for v2
>
> http://wiki.minnowboard.org/MinnowBoard_MAX
> <http://wiki.minnowboard.org/MinnowBoard_MAX>
>
> Also , I used this link for firmware
>
> https://firmware.intel.com/projects/minnowboard-max
> <https://firmware.intel.com/projects/minnowboard-max>
>
> Thank you
>
>
>
> On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9' Hawley
> <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>> wrote:
>
> Can you give me a link to the Baytrail you used, the number you list
> doesn't come up on anything useful.
>
> As for debug firmware you'll need to flash it in just as you did
> with
> the stock firmware, you can snag it from the same place you
> snagged the
> default firmware (which is up on the Intel firmware site)
>
> - John
>
> On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
> > I want to check clock for Ram and spi flash ?
> >
> > do you agree or disagree ?
> >
> > Thank you so much
> >
> > On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani
> > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>
> <mailto:zrahimkhani2014 at gmail.com
> <mailto:zrahimkhani2014 at gmail.com>>> wrote:
> >
> > -I use the Max Gerber files
> > -The both of Leds are on but them have not delay when they are
> > turning on .
> > -It was got with BJA device.
> > _I used BAYTRAIL-IFH8065301567311.
> > -Nothing do not come on serial port
> > -I do not know how debug frimwear .
> > -I can not sure about BGA components How check them ?
> >
> > On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley"
> > <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>
> <mailto:warthog9 at eaglescrag.net
> <mailto:warthog9 at eaglescrag.net>>> wrote:
> >
> > - Did you use the MAX or the Turbot Gerber files?
> > - Do either of the LEDs (D1, D2) come on when power is applied?
> > - Did you get the SoC itself placed correctly?
> > - Which SoC are you using?
> > - Which RAM chips are you using?
> > - Does anything come out on the serial port during boot?
> > - Have you tried with the debug firmware?
> > - Are you sure there isn't a short on the pcb itself?
> >
> > If you can answer that it should get us a good starting point on
> > trying to help you with what you are seeing.
> >
> > - John 'Warthog9' Hawley
> >
> > On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
> >
> > Hello
> > I make a minnowboard max with use from GERBER files on its
> > website .
> >
> > but it do not work . i tested all of voltages . they are
> > correct .
> > also freamwear was programmed by a programmer on chip 1.8 v
> >
> > but it is not work . please suggest a solve?
> >
> > thank you
> >
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> > <mailto:elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>>
> >
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
> > <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> > <mailto:elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>>
> >
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
> >
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
> >
> >
> >
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
> >
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
More information about the elinux-MinnowBoard
mailing list