[MinnowBoard] Minnownoard max design with Gerber fils and install it

[zahra rahimkhani]

Dear john
I asked your question
please check them suggest a new solve ?

Thank you

On Sun, Nov 6, 2016 at 10:03 AM, zahra rahimkhani <zrahimkhani2014 at gmail.com
> wrote:

> I want to check clock for Ram and spi flash ?
>
> do you agree or disagree ?
>
> Thank you so much
>
> On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani <
> zrahimkhani2014 at gmail.com> wrote:
>
>> -I use the Max Gerber files
>> -The both of Leds are on but them have not delay when they are turning on
>> .
>> -It was got with BJA device.
>> _I used BAYTRAIL-IFH8065301567311.
>> -Nothing do not come on serial port
>> -I do not know  how debug frimwear .
>> -I can not sure about BGA components How check them ?
>> On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley" <warthog9 at eaglescrag.net>
>> wrote:
>>
>>> - Did you use the MAX or the Turbot Gerber files?
>>> - Do either of the LEDs (D1, D2) come on when power is applied?
>>> - Did you get the SoC itself placed correctly?
>>> - Which SoC are you using?
>>> - Which RAM chips are you using?
>>> - Does anything come out on the serial port during boot?
>>> - Have you tried with the debug firmware?
>>> - Are you sure there isn't a short on the pcb itself?
>>>
>>> If you can answer that it should get us a good starting point on trying
>>> to help you with what you are seeing.
>>>
>>> - John 'Warthog9' Hawley
>>>
>>> On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
>>>
>>>> Hello
>>>> I make  a minnowboard  max with use from GERBER files on its website .
>>>>
>>>> but it do not work . i tested all of voltages . they are correct .
>>>> also freamwear was programmed by a programmer on chip 1.8 v
>>>>
>>>> but it is not work . please suggest a solve?
>>>>
>>>> thank you
>>>>
>>>>
>>>> _______________________________________________
>>>> elinux-MinnowBoard mailing list
>>>> elinux-MinnowBoard at lists.elinux.org
>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>
>>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161106/bee58801/attachment.html>