[MinnowBoard] Minnownoard max design with Gerber fils and install it

[zahra rahimkhani]

I want to check clock for Ram and spi flash ?

do you agree or disagree ?

Thank you so much

On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani <zrahimkhani2014 at gmail.com
> wrote:

> -I use the Max Gerber files
> -The both of Leds are on but them have not delay when they are turning on .
> -It was got with BJA device.
> _I used BAYTRAIL-IFH8065301567311.
> -Nothing do not come on serial port
> -I do not know  how debug frimwear .
> -I can not sure about BGA components How check them ?
> On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley" <warthog9 at eaglescrag.net>
> wrote:
>
>> - Did you use the MAX or the Turbot Gerber files?
>> - Do either of the LEDs (D1, D2) come on when power is applied?
>> - Did you get the SoC itself placed correctly?
>> - Which SoC are you using?
>> - Which RAM chips are you using?
>> - Does anything come out on the serial port during boot?
>> - Have you tried with the debug firmware?
>> - Are you sure there isn't a short on the pcb itself?
>>
>> If you can answer that it should get us a good starting point on trying
>> to help you with what you are seeing.
>>
>> - John 'Warthog9' Hawley
>>
>> On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
>>
>>> Hello
>>> I make  a minnowboard  max with use from GERBER files on its website .
>>>
>>> but it do not work . i tested all of voltages . they are correct .
>>> also freamwear was programmed by a programmer on chip 1.8 v
>>>
>>> but it is not work . please suggest a solve?
>>>
>>> thank you
>>>
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161106/1be268b1/attachment.html>