[MinnowBoard] PCI express configuration

[Grigory V. Korotov]

David,
Thanks again!


03.11.2016 16:57, Wei, David пишет:
> It is controlled by several software strap bits in the description region of SPI flash image, which is the binary file Vlv2TbltDevicePkg\Stitch\IFWIHeader. You could contact your Intel representative to get the Intel FITC tool to edit those bits.
>
>
> Thanks,
> David  Wei
>
> -----Original Message-----
> From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Grigory V. Korotov
> Sent: Thursday, November 03, 2016 7:57 PM
> To: MinnowBoard Development and Community Discussion <elinux-minnowboard at lists.elinux.org>
> Subject: [MinnowBoard] PCI express configuration
>
> Hi all.
>
> Could someone tell me how i can configure PCI-E to 2x or 4x mode?
>
> Thanks.
>
> Grigory.
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard