[MinnowBoard] PCI express configuration

[Wei, David]

It is controlled by several software strap bits in the description region of SPI flash image, which is the binary file Vlv2TbltDevicePkg\Stitch\IFWIHeader. You could contact your Intel representative to get the Intel FITC tool to edit those bits. 


Thanks,
David  Wei                                 

-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Grigory V. Korotov
Sent: Thursday, November 03, 2016 7:57 PM
To: MinnowBoard Development and Community Discussion <elinux-minnowboard at lists.elinux.org>
Subject: [MinnowBoard] PCI express configuration

Hi all.

Could someone tell me how i can configure PCI-E to 2x or 4x mode?

Thanks.

Grigory.

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard