[MinnowBoard] connecting mipi/csi camera to the minnowboard

Elad Bar eladbar at gmail.com
Wed Nov 2 20:29:31 UTC 2016


Can a MIPI/CSI connector or connector by add to the next version of the
MinnowBoard ?


On Wed, Nov 2, 2016 at 8:34 PM, John Hawley <john.hawley at intel.com> wrote:

> The simple answer is no, we can't connect a MIPI/CSI camera to the
> MinnowBoard MAX/Turbot directly, as we lack a connector for MIPI/CSI.
>
> The longer, more complicated is: yes, but it's obviously complicated.
> The E38xx series SoCs do support MIPI/CSI on them directly, however
> because of space, complexity, cost, a lack of a commonly accepted
> connector, and general lack of open source drivers (at the time) for
> MIPI/CSI cameras, when the MAX/Turbot was designed we forwent a header
> for it.  Fast forward a bit and the situation with MIPI/CSI is better,
> but it's not currently on the board.  It could be added with a custom
> spin of the board, but I don't currently know of anyone doing that.
>
> - John 'Warthog9' Hawley
>
> On 10/29/2016 6:34 AM, Elad Bar wrote:
> > Is it possible to connect a mipi/csi camera to the Minnowboard MAX/Turbo
> > like the one on
> > the Raspberry Pi ?
> >
> >
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161102/2341e801/attachment.html>


More information about the elinux-MinnowBoard mailing list