[MinnowBoard] Firmware hang

[Wei, David]

The log shows that the UEFI "Setup" and "SetupRecovery" variables in SPI flash are corrupted. 
What kind of test were you running in lab?  

Thanks,
David  Wei                                 

-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Sjoerd Simons
Sent: Tuesday, October 25, 2016 9:42 PM
To: elinux-minnowboard at lists.elinux.org
Subject: [MinnowBoard] Firmware hang

Hey,

I've been having issues with some of the minnowboard max boards in our
test lab for a while where at times they never finished post.
Reflashing the flash seemed to help for a while, until the issues came
back again. With the debug version of the firmware the last few lines
are:

Gpio_S5_4 value is 0x3
Gpio_S5_17 value is 0x3
Firmware Volume for Variable Store is corrupted
Firmware Volume for Variable Store is corrupted

ASSERT_EFI_ERROR (Status = Not Found)
ASSERT m:\Vlv2TbltDevicePkg\PlatformInitPei\PlatformEarlyInit.c(213): !EFI_ERROR (Status)


A full log can be found here:
  https://lava.collabora.co.uk/scheduler/job/367353/log_file


Any ideas?
-- 
Sjoerd Simons
Collabora Ltd.

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard