[MinnowBoard] MinnowBoard MAX 0.93 64-Bit & network lost

Abdelghani Ouchabane abdelghani at ezono.com
Sat Sep 3 07:44:43 UTC 2016


Hi,
  can someone tell me where I can fire the bug? I found only this link: https://bugzilla.yoctoproject.org

Cheers
Ghani

----- Original Message -----
From: "David Scully" <dscully at sbimagingsystems.com>
To: elinux-minnowboard at lists.elinux.org
Sent: Friday, 2 September, 2016 19:22:29
Subject: Re: [MinnowBoard] MinnowBoard MAX 0.93 64-Bit & network lost

I have also run into problems with connectivity with the latest firmware that
is resolved by reverting back to 0.92. However, I'm using a custom board
that uses Intel i211 NICs instead of the Realtek NIC. As I understand it,
this is the same NIC as what will be in the Minnowboard Turbot Quad.

For the i211 connected to PCIe Port 1 on my board, I typically can trigger
this failure when I to do bidirectional TCP/IP iperf tests:
Board: iperf -c 192.1.127 -t 300 -d
Development PC: iperf -s

The error message from the Intel NIC driver is:
[Sep 2 10:00] igb 0000:03:00.0 enp3s0: PCIe link lost, device now detached

I'm running stock 0.93 firmware with Ubuntu 16.04.1.

If OP hasn't created a Bugzilla entry I could do it, but I was hesitant
because this isn't original hardware.

Let me know if there is anything I can do to help,
David Scully



--
View this message in context: http://minnowboard.57273.x6.nabble.com/MinnowBoard-MinnowBoard-MAX-0-93-64-Bit-network-lost-tp2387p2392.html
Sent from the MinnowBoard mailing list archive at Nabble.com.
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

This email has been scanned by Barracuda Networks.


More information about the elinux-MinnowBoard mailing list