[MinnowBoard] 4GB Ram need pcb rerouting?

[Grigory V. Korotov]

I looking at micron specs of 8Gb dencity chips and it looks like they 
not using A15 line and using CS1 instead for 2 rank configuration.

Does someone have experience to use 4GB memory config with minimal hw 
modifications? Do i only route CS1 line or i need to do something more?

thanks

Grigory

16.06.2016 9:52, Berth-Olof Bergman пишет:
> It would be possible if DRAM A15 is connected, which it isn't on Minnowboard Max and Turbot. It would also be possible to use 8GB DRAM if channel 2 signals is connected. Our Minnowboard Quattro (4 cores) supports 1GB, 2GB, 4GB and 8 GB configurations. We also have an integrated nanoSSD on board, ranging from 8GB to 64GB.
>
> Best regards,
>
> B-O Bergman
> Winzent Technologies
>
>> 16 juni 2016 kl. 08:45 skrev Grigory V. Korotov <grinux at mail.ru>:
>>
>> Hi!
>>
>> Is it possible to replace currently used ddr3 chips by higher dencity chips without rerouting pcb to get total 4Gb of Ram?
>>
>> Thanks
>>
>> Grigory.
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard