[MinnowBoard] 4GB Ram need pcb rerouting?

[Berth-Olof Bergman]

It would be possible if DRAM A15 is connected, which it isn't on Minnowboard Max and Turbot. It would also be possible to use 8GB DRAM if channel 2 signals is connected. Our Minnowboard Quattro (4 cores) supports 1GB, 2GB, 4GB and 8 GB configurations. We also have an integrated nanoSSD on board, ranging from 8GB to 64GB.

Best regards,

B-O Bergman
Winzent Technologies

> 16 juni 2016 kl. 08:45 skrev Grigory V. Korotov <grinux at mail.ru>:
> 
> Hi!
> 
> Is it possible to replace currently used ddr3 chips by higher dencity chips without rerouting pcb to get total 4Gb of Ram?
> 
> Thanks
> 
> Grigory.
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard