[MinnowBoard] Windows 10 Pro Install

[Eric]

I don' t have any info about that specific error, or if it's related, but I
don't think I'd attempt to run Win 10 Pro from an SD.    I've successfully
run  Windows 8.1 Embedded and Windows  10 IoT  Core (on the MAX, not the
Turbot)  but I'm using a 128GB SSD, attached to a Silverjaw Lure.
Personally, I'm sticking with IoT core,  it's been running well and is
designed for low resource environments.  Even if you're able to get past the
error, I don't believe Windows 10 Pro, running off an SD card with 2 GB RAM
is going to perform very well, just my 2 cents.



-----Original Message-----
From: elinux-MinnowBoard
[mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of miwin
Sent: Friday, April 22, 2016 4:41 AM
To: elinux-minnowboard at lists.elinux.org
Subject: [MinnowBoard] Windows 10 Pro Install

I have a Turbot, and am attempting to install Windows 10 Pro. I am
installing from USB Memory stick, on to a Micro SD Card (SanDisk Extreme 64
GB microSDXC Class 10 Memory Card up to 90 Mbps with U3 Ratings). I have set
the Micro SD Card as Non-removable.

I have installed 10 iot OK, following the online procedure. Is there a
procedure for Professional?

I have so far tried both 32 bit & 64, but neither has been successful. With
32 bit (& 32 bit firmware), I get the following:

The operating system couldnt be loaded because the digital signature of a
file couldnt be verified. 

File \ windows\system32\drivers\lsi sas.sys
0xc0000428

Have you any suggestions where I am going wrong, or any info about Win 10
Pro installation?

Thanks in advance

Mike




--
View this message in context:
http://minnowboard.57273.x6.nabble.com/Windows-10-Pro-Install-tp2236.html
Sent from the MinnowBoard mailing list archive at Nabble.com.
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard