[MinnowBoard] using DLP-USB1232H, verification error. is it due to DP_IO3L in SPI header not connected ?
Sathish Kumar Balasubramaniam -ERS, HCL Tech
b-sathishkumar at hcl.com
Mon Apr 18 19:57:57 UTC 2016
John,
Though I am giving 1.8v to SPI flash header, the CS, SCLK, MISO and MOSI comes from DLP-USB1232H which may be using 3.3v ??? not sure
May be this is the problem ?
If so, how can I turn these 3.3v to 1.8v in DLP-USB1232H ?
Regards,
B.Sathish Kumar
________________________________________
From: elinux-MinnowBoard [elinux-minnowboard-bounces at lists.elinux.org] on behalf of John Hawley [john.hawley at intel.com]
Sent: 19 April 2016 01:25:53
To: elinux-minnowboard at lists.elinux.org
Subject: Re: [MinnowBoard] using DLP-USB1232H, verification error. is it due to DP_IO3L in SPI header not connected ?
Are your logic pins running at 1.8V, or just feeding 1.8v into pin 1?
On 04/18/2016 12:39 PM, Sathish Kumar Balasubramaniam -ERS, HCL Tech wrote:
> John,
>
> I have a voltage regulator which has 1.8v (1.78v in digital meter) and it is given to the SPI flash header.
>
> Regards,
> B.Sathish Kumar
> ________________________________________
> From: elinux-MinnowBoard [elinux-minnowboard-bounces at lists.elinux.org] on behalf of John Hawley [john.hawley at intel.com]
> Sent: 19 April 2016 01:05:45
> To: elinux-minnowboard at lists.elinux.org
> Subject: Re: [MinnowBoard] using DLP-USB1232H, verification error. is it due to DP_IO3L in SPI header not connected ?
>
> Are you doing 1.8v or 3.3v into the MAXes SPI flash header? The part is
> setup (on the MAX) for 1.8v operation, so what you might be seeing is it
> not operating correctly due to over voltage.
>
> - John
>
> On 04/18/2016 12:27 PM, Sathish Kumar Balasubramaniam -ERS, HCL Tech wrote:
>> forgot to add env info
>>
>> OS: Ubuntu 14.04.4 64bit
>> flashrom version - 0.9.9
>>
>
>
> ::DISCLAIMER::
> ----------------------------------------------------------------------------------------------------------------------------------------------------
>
> The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses and other defects.
>
> ----------------------------------------------------------------------------------------------------------------------------------------------------
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
More information about the elinux-MinnowBoard
mailing list