[MinnowBoard] using DLP-USB1232H, verification error. is it due to DP_IO3L in SPI header not connected ?

[John Hawley]

Are you doing 1.8v or 3.3v into the MAXes SPI flash header?  The part is
setup (on the MAX) for 1.8v operation, so what you might be seeing is it
not operating correctly due to over voltage.

- John

On 04/18/2016 12:27 PM, Sathish Kumar Balasubramaniam -ERS, HCL Tech wrote:
> forgot to add env info
> 
> OS: Ubuntu 14.04.4 64bit
> flashrom version - 0.9.9
> 
> 
> ::DISCLAIMER::
> ----------------------------------------------------------------------------------------------------------------------------------------------------
> 
> The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses and other defects.
> 
> ----------------------------------------------------------------------------------------------------------------------------------------------------
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>