[MinnowBoard] MinnowBoard Turbot Watchdog
Mike Winter (Work)
mike.winter at miwin.co.uk
Fri Apr 8 14:02:00 UTC 2016
Hi John, thanks for the reply.
I am looking at using the Minnowboard in an embedded environment. Other PCs
that I have used have a hardware Watchdog, which, when turned on, you are
required to poll at definable intervals. If you do not poll it quickly
enough (or stop polling, due to hung software), the PC will perform a hard
reset. Is this a feature of the Minnowboard, or likely to be incorporated in
future versions?
Thanks again for your help
Mike
-----Original Message-----
From: John Hawley [mailto:john.hawley at intel.com]
Sent: 08 April 2016 06:09
To: elinux-minnowboard at lists.elinux.org
Subject: Re: [MinnowBoard] MinnowBoard Turbot Watchdog
What kind of watchdog are you looking for / need? Just trying to figure out
what kind of watchdog you are looking for.
- John 'Warthog9' Hawley
On 4/7/2016 3:25 AM, Mike Winter (Work) wrote:
> I have a MinnowBoard Turbot on the way, but when I ordered I forgot to
> check whether there is a watchdog, which is a requirement for my
> project. Is there one in the Turbot, I haven't found any mention of one?
>
>
>
> Regards
>
> *Mike Winter*
>
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
More information about the elinux-MinnowBoard
mailing list