[MinnowBoard] Adding a device to ACPI table when Building Firmware

[Wu, Mike]

Hi,

You can add SSDT table for your device in a shell app and then run Windows 10. Many people are doing this to support their device without changing shipping firmware. Check out the example code in Vlv2TbltDevicePkg\Application\SsdtUpdate.

Mike Wu


From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Juan Black Romero
Sent: Friday, March 25, 2016 7:52 AM
To: elinux-minnowboard at lists.elinux.org
Subject: [MinnowBoard] Adding a device to ACPI table when Building Firmware

I am interested on building drivers for devices attached to SPI and I2C ports on the Minnowboard Max/turbot using Windows 10. Window requires the device to be listed in the ACPI table in order for it to be found by the driver; what is the procedure for adding a device to the ACPI table before building the firmware?
In addition, what would be the specific building procedure for this modified firmware ?
Thank you beforehand.
Regards.
Juan Black
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20160325/771e63a8/attachment.html>