[MinnowBoard] Adding a device to ACPI table when Building Firmware

[Juan Black Romero]

I am interested on building drivers for devices attached to SPI and I2C
ports on the Minnowboard Max/turbot using Windows 10. Window requires the
device to be listed in the ACPI table in order for it to be found by the
driver; what is the procedure for adding a device to the ACPI table before
building the firmware?

In addition, what would be the specific building procedure for this
modified firmware ?

Thank you beforehand.

Regards.

Juan Black
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20160324/80fc15b0/attachment.html>