[MinnowBoard] Problem with boot firmware for MinnowMax version 0.90

Richardson, Brian brian.richardson at intel.com
Thu Mar 24 18:59:01 UTC 2016


The SPI flash part has to be supported by the firmware. It looks like you changed to a part that isn't supported by the code, which explains why it won't boot. It's possible the 0.81 version had support for different SPI parts that was removed from later revisions.

Thanks ... br
---
Brian Richardson -- brian.richardson at intel.com -- Twitter: intel_brian

-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of AntejaVM
Sent: Thursday, March 24, 2016 5:43 AM
To: elinux-minnowboard at lists.elinux.org
Subject: Re: [MinnowBoard] Problem with boot firmware for MinnowMax version 0.90

Hi, 

Yes we replaced SMD IC flash part, because we have tested if BIOS works with other flashes. I'm using Minnowboard Max.  
Original flash part is Micron and the new that we have soldered is Winbond W25Q64FW .  

Minnowboard Max with Winbond flash don't boot firmware version 0.90, 0.84, 0.83, 0.82.
Both flash ICs boot firmware version 0.81. 

Best Regards,
Anteja



--
View this message in context: http://minnowboard.57273.x6.nabble.com/MinnowBoard-Problem-with-boot-firmware-for-MinnowMax-version-0-90-tp2133p2140.html
Sent from the MinnowBoard mailing list archive at Nabble.com.
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard


More information about the elinux-MinnowBoard mailing list