[MinnowBoard] Problem with boot firmware for MinnowMax version 0.90

[AntejaVM]

Hi, 
>> What board revision do you have?How did you perform the firmware update?
I have A2 boad revision.  I update firmware with dediprog, not with efi
update app. 

>>Are you running 32 bit or 64 bit images?
First time when I flash on MinnowMax I try 0.90 release 32 bit version, when
I conclude that firmware don't but I flash 0.90 debug 64 bit version because
of debug log and I web page I can't download 0.90 32bit debug version,
bacause I got 0.84 32 bit debug version it not same thing.  Version I try
are: 0.78, 0.79, 0.80, 0.81, 0.82, 0.83, 0.84, 0.90; version 0.78, 0.79,
0.80, 0.81 work on my MinnowMax, but 0.82, 0.83, 0.84, 0.90 don't work on
MinnowMax Board. 

>> As a side bar question:  Have you tried the 0.82 and 0.83 firmware
>> versions?
Yes, I try but same problem, like with 0.90 and 0.84 version. 

>>From serial, firmware has problem to recognize your flash part. So I got
one more question.Could >>you reprogram your firmware to older version, say
0.81 which was working according to your report, >>to see if it still works?
If any version doesn’t work anymore, you properly have a broken SPI chip.
I try firmware on second MinnowMax same board revision ( A2 ) but different
flash (original flash ), on this board firmware 0.90 work.  I remember that
on one MinnowMax we change flash and we put Winbond W25Q64DW. 




--
View this message in context: http://minnowboard.57273.x6.nabble.com/MinnowBoard-Problem-with-boot-firmware-for-MinnowMax-version-0-90-tp2133p2138.html
Sent from the MinnowBoard mailing list archive at Nabble.com.