[MinnowBoard] Hardware Virtualization support in Minnowboard Max?

[John Hawley]

I can only assume it's gotten turned off in the firmware as (admittedly
this is a little old):

http://wiki.minnowboard.org/IntelE38xx

shows vmx being present in the cpuflags.  I'll check on a live board
when I get into the office.  To the best of my knowledge we don't have
an on/off toggle for that in the firmware, so if it's missing the
firmware team may have disabled it (though I don't remember any errata
to that effect).

Let me do some checking and I'll get back to the list.

- John 'Warthog9' Hawley

On 2/17/2016 6:15 AM, Supriti Singh wrote:
> Hello,
> 
> As I understood MinnowBoard Max support hardware virtualization.
> 
> grep vmx /proc/cpuinfo shows the flags. 
> 
> I am running yocto  "core-image-sato"
> 
> When I boot, dmesg|grep kvm prints out 
> 
> * kvm: no hardware support*
> 
> Do I need to enable it in UEFI? If yes then how can I do it. 
> 
> Thanks,
> Supriti 
> 
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>