[MinnowBoard] case?

[George Hartzell]

I suppose you could.  Seems to me you'd want to have a top, a bottom, and as many middle pieces as you have Minnows; swap the M/F 30mm standoffs for M/M and then replace the "bolts/screws" on the top with nuts that screw onto the top of that topmost 30.

How many are you looking for?

g.

Sent from a device that makes me type with two fingers.

> On Nov 12, 2015, at 8:23 AM, David Byte <dbyte at suse.com> wrote:
> 
> George, Do you have parts where you can stack multiple units vertically in these?
> 
> David Byte
> Sr. Technology Strategist
> Alliances and SUSE Embedded
> dbyte at suse.com
> 918.528.4422
> 
> From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org> on behalf of George Hartzell <hartzell at alerce.com>
> Reply-To: "elinux-minnowboard at lists.elinux.org" <elinux-minnowboard at lists.elinux.org>
> Date: Wednesday, November 4, 2015 at 9:08 AM
> To: "elinux-minnowboard at lists.elinux.org" <elinux-minnowboard at lists.elinux.org>
> Subject: Re: [MinnowBoard] case?
> 
> 
> I still have some left.  Drop me a note if you're interested.
> 
> g.
> 
> Sent from a device that makes me type with two fingers.
> 
> On Nov 3, 2015, at 4:51 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
> 
>> George Hartzell had some great SC:Elementary cases for sale, they included all the bits you need and are $25 a pop.  I've attached the pictures of mine installed. I have the Silverjawm lure, but I imagine you can make the Flotsam work too  You might be able to reach him here or hartzell at alerce.com 
>> 
>> 
>> -----  From his earlier email -----
>> The folk(s) at SC::Elementary wrote a nice article about setting up a
>> MinnowBoard Max, you can/should check it out here:
>> 
>>     http://scelementary.com/2015/03/10/minnowboard-max-introduction.html
>> 
>> I liked the case that they built and they were nice enough to share
>> their design file.  Here's my description of assembling mine:
>> 
>>     http://shrimp.alerce.com/minnow_max_case/#!case.md
>> 
>> Since I had to buy a day membership to a local hacker space and bought
>> a full sheet of acrylic, I ended up a half dozen extras.
>> 
>> If you'd like one, let me know.  Here's how it'll work:
>> 
>>     - Cost, shipped in the US, is $25.  I don't have the time to
>>       figure out international stuff.
>>     - First come, first served
>>     - I'll send you the three acrylic parts, the black nylon
>>       standoffs/spacers/screws and (for grins) a power connector.
>>     - When you receive it and are content, you can mail me a check or
>>       pay me via paypal.
>>     - If it's not what you expected, you'll mail it back.
>> 
>>> On Tue, Nov 3, 2015 at 5:13 PM, David Byte <dbyte at suse.com> wrote:
>>> I am looking for a case that will take my minnow board max and the Flotsam Lure.  Anyone use one that they like?
>>> 
>>> David Byte
>>> Sr. Technology Strategist
>>> Alliances and SUSE Embedded
>>> dbyte at suse.com
>>> 918.528.4422
>>> 
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> <IMG_20150914_221525-001.jpg>
>> <IMG_20150914_221554-001.jpg>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20151112/40cf2b74/attachment-0001.html>