[MinnowBoard] case?

[David Byte]

George, Do you have parts where you can stack multiple units vertically in these?

David Byte
Sr. Technology Strategist
Alliances and SUSE Embedded
dbyte at suse.com
918.528.4422

From: elinux-MinnowBoard <elinux-minnowboard-bounces at lists.elinux.org<mailto:elinux-minnowboard-bounces at lists.elinux.org>> on behalf of George Hartzell <hartzell at alerce.com<mailto:hartzell at alerce.com>>
Reply-To: "elinux-minnowboard at lists.elinux.org<mailto:elinux-minnowboard at lists.elinux.org>" <elinux-minnowboard at lists.elinux.org<mailto:elinux-minnowboard at lists.elinux.org>>
Date: Wednesday, November 4, 2015 at 9:08 AM
To: "elinux-minnowboard at lists.elinux.org<mailto:elinux-minnowboard at lists.elinux.org>" <elinux-minnowboard at lists.elinux.org<mailto:elinux-minnowboard at lists.elinux.org>>
Subject: Re: [MinnowBoard] case?


I still have some left.  Drop me a note if you're interested.

g.

Sent from a device that makes me type with two fingers.

On Nov 3, 2015, at 4:51 PM, Jeremy Hoel <jthoel at gmail.com<mailto:jthoel at gmail.com>> wrote:

George Hartzell had some great SC:Elementary cases for sale, they included all the bits you need and are $25 a pop.  I've attached the pictures of mine installed. I have the Silverjawm lure, but I imagine you can make the Flotsam work too  You might be able to reach him here or hartzell at alerce.com<mailto:hartzell at alerce.com>


-----  From his earlier email -----
The folk(s) at SC::Elementary wrote a nice article about setting up a
MinnowBoard Max, you can/should check it out here:

    http://scelementary.com/2015/03/10/minnowboard-max-introduction.html

I liked the case that they built and they were nice enough to share
their design file.  Here's my description of assembling mine:

    http://shrimp.alerce.com/minnow_max_case/#!case.md

Since I had to buy a day membership to a local hacker space and bought
a full sheet of acrylic, I ended up a half dozen extras.

If you'd like one, let me know.  Here's how it'll work:

    - Cost, shipped in the US, is $25.  I don't have the time to
      figure out international stuff.
    - First come, first served
    - I'll send you the three acrylic parts, the black nylon
      standoffs/spacers/screws and (for grins) a power connector.
    - When you receive it and are content, you can mail me a check or
      pay me via paypal.
    - If it's not what you expected, you'll mail it back.

On Tue, Nov 3, 2015 at 5:13 PM, David Byte <dbyte at suse.com<mailto:dbyte at suse.com>> wrote:
I am looking for a case that will take my minnow board max and the Flotsam Lure.  Anyone use one that they like?

David Byte
Sr. Technology Strategist
Alliances and SUSE Embedded
dbyte at suse.com<mailto:dbyte at suse.com>
918.528.4422<tel:918.528.4422>

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard


<IMG_20150914_221525-001.jpg>
<IMG_20150914_221554-001.jpg>
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20151112/281ff5ae/attachment.html>