[MinnowBoard] MinnowBoard scheduled for Obsolescence?

[Eric Owens]

I don't know if new feature requests, for the next MBM revision, have been
closed but where is the best place to make a suggestion or a request?

-----Original Message-----
From: elinux-MinnowBoard
[mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Jolley,
Stephen K
Sent: Thursday, September 24, 2015 11:00 AM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] MinnowBoard scheduled for Obsolescence?

Currently shipping is the Minnowboard MAX.  It is based on the A2 (not v2)
rev of the PCB.  It is being upgraded to A4; date still TBD.  A number of HW
fixes are planned for A4.  CircuitCo manufactures this board.  It is my
understanding that A4 will continue to be called the Minnowboard MAX.  The
list of planned fixes can be found at this wiki:
https://wiki.yoctoproject.org/wiki/Minnow_Bug_Triage

The Turbot has been announced by ADI, it is a pending compatible board.
Pending because it is not yet available in volume.  If it goes into volume
and proves to be compatible as planned; which means the buses should behave
the same as the MAX.  

There is a slight change to the LSB between the A2 and A4.   The Turbot also
has this change.  It is documented at:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=6865 but since neither
board is in production yet; this is still an open item.  It is also
discussed at: http://elinux.org/Minnowboard:MinnowMax

A number of 3D designs at this web site:
http://elinux.org/Minnowboard:MinnowMax

Thanks,

Stephen


-----Original Message-----
From: elinux-MinnowBoard
[mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Blibbet
Sent: Thursday, September 24, 2015 10:02 AM
To: elinux-minnowboard at lists.elinux.org
Subject: Re: [MinnowBoard] MinnowBoard scheduled for Obsolescence?

On 09/24/2015 09:46 AM, Jolley, Stephen K wrote:
> See note about it at:
>
> http://wiki.minnowboard.org/Where_to_buy

Thanks.

So Minnowboard MAX v2 will have an A4 board change. Will this be called
Minnowboard MAX v3, or will this be the Turbot?

Could someone please explain where/how the newly-announced Minnowboard
Turbot fits into the updated Minnowboard MAX?

What is the lure compatibility of upcoming A4-based MAX and Turbot to
existing MAX v2 lures?

http://firmwaresecurity.com/2015/08/19/minnow-turbot-announced/
http://www.adiengineering.com/products/minnowboard-turbot/

Also, is there any good enclosure for the current Minnows? The Netgate one
looks nice, but it covers access to some ports.

Thanks!
Lee


_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard