[MinnowBoard] How do I know if there is power going to my Silverjaw lure?

[Jeremy Hoel]

I had this problem before, and one my board.. it seems the high speed
connector wasn't working well.  Running a 3 Amp power supply with help,
also, on the board you should be able to check for power at a few test
points (they where labeled I thought).    Also, I needed a firmware update
to help it work too.

On Thu, Sep 17, 2015 at 1:20 PM, Vasanthi, Jagatha <
jagatha.vasanthi at intel.com> wrote:

> Hi all
> Is there a way to tell if my silverjaw lure has power going to it when I
> connect it to the Minnowboard Max? I don't see any led lights turn on.
>
> I have a rather unusual setup with my minnowboard max.  I'm trying to
> connect a NVMe PCIe SSD to the silverjaw lure by using a "PCIe x1 to mPCIe"
> adapter on the mPCIe slot.
> I'm not able to see this SSD. As a first step, I'm trying to see if there
> are any power issues.
>
> Thanks!
> Vasanthi
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150917/5979e656/attachment.html>