[MinnowBoard] New Board not Video Output
Berth-Olof Bergman
bo.bergman at winzenttech.com
Tue Jul 21 15:57:54 UTC 2015
It also happened to me. I had a combined 5V and 12 V poor supply that I connected to a experiment board. From that board I fed Minnowboard Max with 5V and a mini HDMI monitor with 12V. However, the yellow cable from the power supply was 5V and the red 12V, so they got the wrong voltage and my Minnowboard Max was smoked.
As the power supply had a black, red and yellow cable I took for granted that they were following the standard. It was an expensive lesson to always measure first before connecting.
Best regards,
B-O Bergman
> 21 jul 2015 kl. 17:44 skrev Gerard Bucas <gerard.b at tekmagic.net>:
>
> The same symptoms are exhibited when you insert a 12V power supply by accident!! I have done that with 3 different minnowMAX boards and had to replace U35 to fix them.
>
> Hope this helps!
>
> Gerard
>
>
>
> On Jul 21, 2015, at 5:39 PM, Matthew J Blandin <hbbs10 at gmail.com <mailto:hbbs10 at gmail.com>> wrote:
>
>> Before I go into trying to get it re-flashed either by CiruitCo or by getting the DediProg, could this potentially be a symptom of not enough power? Originally I got a power supply, but somehow confused myself and bought the wrong one, so I've been supplementing a 5V 1A power adapter that I had laying around until I get the correct power adapter that supplies enough Amperage.
>>
>> Thanks,
>> -Matt
>>
>> On Tue, Jul 21, 2015 at 10:49 AM, Eric owens <ericolv at cox.net <mailto:ericolv at cox.net>> wrote:
>> The same thing happened to me. I had to get an RMA from CircuitCo, shippped it back and they reflashed it. They charged me to get it shipped back (another topic). To do this yourself, you need a Dediprog SF100 spi programmer $230.
>> From: Matthew J Blandin <mailto:hbbs10 at gmail.com>
>> Sent: 7/21/2015 7:23 AM
>> To: MinnowBoard Development and Community Discussion <mailto:elinux-minnowboard at lists.elinux.org>
>> Subject: Re: [MinnowBoard] New Board not Video Output
>>
>> Thank you all for the quick replies. Where might I get an SP1 programmer?
>>
>> Thanks,
>> -Matt
>>
>>
>> On Tue, Jul 21, 2015 at 2:44 AM, Berth-Olof Bergman <bo.bergman at winzenttech.com <mailto:bo.bergman at winzenttech.com>> wrote:
>> Hi,
>>
>> I think the firmware are not present or faulty, as you should have 2 LEDs lighting. It looks like this if you have a empty SPI flash.
>>
>> Best regards,
>>
>> B-O Bergman
>>
>>
>> > 20 jul 2015 kl. 22:13 skrev Bill Traynor <btraynor at gmail.com <mailto:btraynor at gmail.com>>:
>> >
>> > On Mon, Jul 20, 2015 at 4:08 PM, Matthew J Blandin <hbbs10 at gmail.com <mailto:hbbs10 at gmail.com>> wrote:
>> >> Hello,
>> >>
>> >> I have just received my Minnowboard Max. Currently, I only have an empty
>> >> micro SD card, however, I am under the impression that when powered up it
>> >> will default to the UEFI command line. When powered and plugged into and
>> >> HDMI compatible screen, the screen says that it is not receiving any video
>> >> input from the HDMI cable and goes into power saving. The board itself has
>> >> only one LED light up (the LED closest to the switch). Does anyone know what
>> >> is causing the problem?
>> >
>> > http://elinux.org/Minnowboard:MinnowMax#Known_Issues <http://elinux.org/Minnowboard:MinnowMax#Known_Issues>
>> >
>> > I've had this occur with a faulty hdmi cable as well.
>> >
>> >>
>> >> Thanks,
>> >> -Matt B
>> >>
>> >> _______________________________________________
>> >> elinux-MinnowBoard mailing list
>> >> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>> >>
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150721/d8964cd1/attachment.html>
More information about the elinux-MinnowBoard
mailing list