[MinnowBoard] New Board not Video Output
Berth-Olof Bergman
bo.bergman at winzenttech.com
Tue Jul 21 15:50:15 UTC 2015
Hi Matt,
The minimum recommendation is 2.5A and that’s for driving the Minnowboard Max alone. For many high speed expansion lures you will need more than that. So you are right, you should test it with a bigger power supply.
Best regards,
B-O Bergman
> 21 jul 2015 kl. 17:39 skrev Matthew J Blandin <hbbs10 at gmail.com>:
>
> Before I go into trying to get it re-flashed either by CiruitCo or by getting the DediProg, could this potentially be a symptom of not enough power? Originally I got a power supply, but somehow confused myself and bought the wrong one, so I've been supplementing a 5V 1A power adapter that I had laying around until I get the correct power adapter that supplies enough Amperage.
>
> Thanks,
> -Matt
>
> On Tue, Jul 21, 2015 at 10:49 AM, Eric owens <ericolv at cox.net <mailto:ericolv at cox.net>> wrote:
> The same thing happened to me. I had to get an RMA from CircuitCo, shippped it back and they reflashed it. They charged me to get it shipped back (another topic). To do this yourself, you need a Dediprog SF100 spi programmer $230.
> From: Matthew J Blandin <mailto:hbbs10 at gmail.com>
> Sent: 7/21/2015 7:23 AM
> To: MinnowBoard Development and Community Discussion <mailto:elinux-minnowboard at lists.elinux.org>
> Subject: Re: [MinnowBoard] New Board not Video Output
>
> Thank you all for the quick replies. Where might I get an SP1 programmer?
>
> Thanks,
> -Matt
>
>
> On Tue, Jul 21, 2015 at 2:44 AM, Berth-Olof Bergman <bo.bergman at winzenttech.com <mailto:bo.bergman at winzenttech.com>> wrote:
> Hi,
>
> I think the firmware are not present or faulty, as you should have 2 LEDs lighting. It looks like this if you have a empty SPI flash.
>
> Best regards,
>
> B-O Bergman
>
>
> > 20 jul 2015 kl. 22:13 skrev Bill Traynor <btraynor at gmail.com <mailto:btraynor at gmail.com>>:
> >
> > On Mon, Jul 20, 2015 at 4:08 PM, Matthew J Blandin <hbbs10 at gmail.com <mailto:hbbs10 at gmail.com>> wrote:
> >> Hello,
> >>
> >> I have just received my Minnowboard Max. Currently, I only have an empty
> >> micro SD card, however, I am under the impression that when powered up it
> >> will default to the UEFI command line. When powered and plugged into and
> >> HDMI compatible screen, the screen says that it is not receiving any video
> >> input from the HDMI cable and goes into power saving. The board itself has
> >> only one LED light up (the LED closest to the switch). Does anyone know what
> >> is causing the problem?
> >
> > http://elinux.org/Minnowboard:MinnowMax#Known_Issues <http://elinux.org/Minnowboard:MinnowMax#Known_Issues>
> >
> > I've had this occur with a faulty hdmi cable as well.
> >
> >>
> >> Thanks,
> >> -Matt B
> >>
> >> _______________________________________________
> >> elinux-MinnowBoard mailing list
> >> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
> >>
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150721/4f6ffd14/attachment-0001.html>
More information about the elinux-MinnowBoard
mailing list