[MinnowBoard] New Board not Video Output

[Matthew J Blandin]

Before I go into trying to get it re-flashed either by CiruitCo or by
getting the DediProg, could this potentially be a symptom of not enough
power? Originally I got a power supply, but somehow confused myself and
bought the wrong one, so I've been supplementing a 5V 1A power adapter that
I had laying around until I get the correct power adapter that supplies
enough Amperage.

Thanks,
-Matt

On Tue, Jul 21, 2015 at 10:49 AM, Eric owens <ericolv at cox.net> wrote:

> The same thing happened to me.  I had to get an RMA from CircuitCo,
> shippped it back and they reflashed it.  They charged me to get it shipped
> back (another topic).      To do this yourself, you need a Dediprog SF100
> spi programmer $230.
> ------------------------------
> From: Matthew J Blandin <hbbs10 at gmail.com>
> Sent: ‎7/‎21/‎2015 7:23 AM
> To: MinnowBoard Development and Community Discussion
> <elinux-minnowboard at lists.elinux.org>
> Subject: Re: [MinnowBoard] New Board not Video Output
>
> Thank you all for the quick replies. Where might I get an SP1 programmer?
>
> Thanks,
> -Matt
>
>
> On Tue, Jul 21, 2015 at 2:44 AM, Berth-Olof Bergman <
> bo.bergman at winzenttech.com> wrote:
>
>> Hi,
>>
>> I think the firmware are not present or faulty, as you should have 2 LEDs
>> lighting. It looks like this if you have a empty SPI flash.
>>
>> Best regards,
>>
>> B-O Bergman
>>
>>
>> > 20 jul 2015 kl. 22:13 skrev Bill Traynor <btraynor at gmail.com>:
>> >
>> > On Mon, Jul 20, 2015 at 4:08 PM, Matthew J Blandin <hbbs10 at gmail.com>
>> wrote:
>> >> Hello,
>> >>
>> >> I have just received my Minnowboard Max. Currently, I only have an
>> empty
>> >> micro SD card, however, I am under the impression that when powered up
>> it
>> >> will default to the UEFI command line. When powered and plugged into
>> and
>> >> HDMI compatible screen, the screen says that it is not receiving any
>> video
>> >> input from the HDMI cable and goes into power saving. The board itself
>> has
>> >> only one LED light up (the LED closest to the switch). Does anyone
>> know what
>> >> is causing the problem?
>> >
>> > http://elinux.org/Minnowboard:MinnowMax#Known_Issues
>> >
>> > I've had this occur with a faulty hdmi cable as well.
>> >
>> >>
>> >> Thanks,
>> >> -Matt B
>> >>
>> >> _______________________________________________
>> >> elinux-MinnowBoard mailing list
>> >> elinux-MinnowBoard at lists.elinux.org
>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150721/220cbf58/attachment-0001.html>