[MinnowBoard] New Board not Video Output

[Berth-Olof Bergman]

Hi,

I think the firmware are not present or faulty, as you should have 2 LEDs lighting. It looks like this if you have a empty SPI flash.

Best regards,

B-O Bergman


> 20 jul 2015 kl. 22:13 skrev Bill Traynor <btraynor at gmail.com>:
> 
> On Mon, Jul 20, 2015 at 4:08 PM, Matthew J Blandin <hbbs10 at gmail.com> wrote:
>> Hello,
>> 
>> I have just received my Minnowboard Max. Currently, I only have an empty
>> micro SD card, however, I am under the impression that when powered up it
>> will default to the UEFI command line. When powered and plugged into and
>> HDMI compatible screen, the screen says that it is not receiving any video
>> input from the HDMI cable and goes into power saving. The board itself has
>> only one LED light up (the LED closest to the switch). Does anyone know what
>> is causing the problem?
> 
> http://elinux.org/Minnowboard:MinnowMax#Known_Issues
> 
> I've had this occur with a faulty hdmi cable as well.
> 
>> 
>> Thanks,
>> -Matt B
>> 
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard