[MinnowBoard] New Board not Video Output

[Berth-Olof Bergman]

Hi,

You need to a SPI programmer, download the firmware and reflash. Your SPI flash are probably empty and not flashed at factory.

Best regards,

B-O Bergman

> 20 jul 2015 kl. 22:08 skrev Matthew J Blandin <hbbs10 at gmail.com>:
> 
> Hello,
> 
> I have just received my Minnowboard Max. Currently, I only have an empty micro SD card, however, I am under the impression that when powered up it will default to the UEFI command line. When powered and plugged into and HDMI compatible screen, the screen says that it is not receiving any video input from the HDMI cable and goes into power saving. The board itself has only one LED light up (the LED closest to the switch). Does anyone know what is causing the problem?
> 
> Thanks,
> -Matt B
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard