[MinnowBoard] Minnowboard doens't work after connecting 12V power

[Grigory V. Korotov]

It need some investigation on what chip or chips is damaged. I think buying new board is best solution in this case. Don't waste your time. 



> 26 июня 2015 г., в 12:53, Wu, DaweiX <daweix.wu at intel.com> написал(а):
> 
> Thanks for your quick reply . Can I fix it by replacing some power chip ?
>  
> From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Grigory V. Korotov
> Sent: Friday, June 26, 2015 17:47 PM
> To: MinnowBoard Development and Community Discussion
> Subject: Re: [MinnowBoard] Minnowboard doens't work after connecting 12V power
>  
> 
> Hi. 
> Probably you need new board. Max dont have any overvoltage protection. 
> 
> 
> 26 июня 2015 г., в 11:15, Wu, DaweiX <daweix.wu at intel.com> написал(а):
> 
> Hi, there is only one LED(d1) on, anyone can help to on this ?
>  
>  
> Thanks,
> Dawei
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150626/a61c0814/attachment-0001.html>