[MinnowBoard] Hack for a broken f1.

[Ferchu R]

I tried to short F1, but this way the system won't boot. If I can not
replace the component, does it means the board is unrecoverable?

2015-06-09 18:37 GMT-05:00 Ferchu R <chamac2 at gmail.com>:

> It seems I drained too much current from USB ports, and something broke
> down, and now these ports have no voltage. By taking a look to the
> schematics and testing with a multimeter, it seems that f1 is open (by
> comparison, a working Minnowboard has 0.7 ohm).
>
> As just shorting f1 seems to let the board in a un-bootable state, I was
> wondering if there is a simple hack to bring back voltage to the ports,
> without actually replacing the broken component.
>
> Thanks.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150623/188c1f75/attachment.html>