[MinnowBoard] Fastboot Problems - Android Bring-up
John Hawley
john.hawley at intel.com
Wed Jun 10 02:01:08 UTC 2015
Unless there's something you need in the 0.80 firmware, you may want to
just back it down to 0.79 for now while we investigate more fully.
- John 'Warthog9' Hawley
On 6/9/2015 6:37 PM, Wei, David wrote:
> /MNW2MAX1.X64.0080.R01.1505111746/ firmware has “Enabled Dual-HDMI
> display outputs”. This should be the cause of this problem. Android
> and firmware team have started to look at this issue.
>
>
>
>
>
> Thanks,
>
> David | SSG BIOS
>
>
>
> *From:*elinux-MinnowBoard
> [mailto:elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Dave
> Smith
> *Sent:* Tuesday, June 09, 2015 10:33 PM
> *To:* elinux-minnowboard at lists.elinux.org
> *Subject:* [MinnowBoard] Fastboot Problems - Android Bring-up
>
>
>
> Hello all -
>
>
>
> I’m going through my first run with the MinnowBoard attempting to load
> the pre-built Android package:
>
> https://01.org/android-ia/guides/android-5.x-lollipop-bring-guide
>
>
>
> I was able to successfully flash the latest firmware, so my board is now
> running:
>
> /MinnowBoard MAX B3 Platform/
>
> /MNW2MAX1.X64.0080.R01.1505111746/
>
>
>
> I downloaded the Android 5.1.0_r1 package for 64-bit from the above link.
>
>
>
> I am now attempting to boot into fastboot and flash the image. I have
> successfully flashed the image onto USB media, but when I attempt to
> boot from that device there are no graphics on the screen (after the
> secure boot warning), and I can’t do anything useful from the serial
> console.
>
>
>
> Here is what I see out the serial console after selecting the USB media
> as the boot device (and pressing up to bypass the secure boot screen):
>
> *****
>
> entering Fastboot mode
>
> Locating boot image from file \fastboot.img
>
> Read boot image from file (13669676 bytes)
>
> verify Fastboot boot image
>
> decoding keystore data
>
> BootSignature format version 1
>
>
>
> get boot image header
>
> decoding boot image signature
>
> BootSignature format version 1
>
>
>
> verifying boot image
>
> chainloading fastboot, boot state is ORANGE
>
> chainloading boot image, boot state is ORANGE
>
> Creating command line
>
> Loading the ramdisk
>
> ramdisk size 5204458
>
> Loading the kernel
>
> [ 0.019057] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>
> [ 0.019057] ENERGY_PERF_BIAS: View and update with
> x86_energy_perf_policy(8)
>
> [ 0.098678] EM:OEM0 table not found!!
>
> [ 0.415527] intel_setup_crystal_cove_sd_regulators: no match device found
>
> [ 0.700807] hpet: number irqs doesn't agree with number of timers
>
> [ 0.786072] ------------[ cut here ]------------
>
> [ 0.791287] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:52
> sysfs_warn_dup+0x86/0xa0()
>
> [ 0.799785] sysfs: cannot create duplicate filename
> '/devices/virtual/extcon/hdmi'
>
> [ 0.808710] ---[ end trace 386b12882abb18b3 ]---
>
> [ 0.813927] ------------[ cut here ]------------
>
> [ 0.819123] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240
> kobject_add_internal+0x284/0x3f0()
>
> [ 0.828776] ---[ end trace 386b12882abb18b4 ]---
>
> [ 0.938056] mei_txe 0000:00:1a.0: TXE8086: acpi __CRS resource not found
>
> [ 0.989940] intel_byt_dts_thermal: request_threaded_irq ret -22
>
> [ 1.032730] intel_rapl: RAPL domain package detection failed
>
> [ 1.039106] intel_rapl: RAPL domain core detection failed
>
> [ 1.045197] intel_rapl: RAPL domain uncore detection failed
>
> [ 1.051464] intel_rapl: RAPL domain dram detection failed
>
> [ 1.057555] intel_rapl: no valid rapl domains found in package 0
>
> [ 1.084405] otg_wakelock_init: No USB transceiver found
>
> [ 1.090902] init: failed to probe driver -19
>
> [ 1.098274] had: Vidya: Enter alsa_card_intelhad_init
>
> [ 1.209036] init: could not import file '/init.userfastboot.rc' from
> '/init.rc'
>
> [ 1.494081] init: /dev/hw_random not found
>
> [ 1.499939] init: /dev/hw_random not found
>
> [ 1.514801] init: Warning! Service dhcpcd_eth0 needs a SELinux
> domain defined; please fix!
>
> [ 1.533180] userfastboot: starting graphics
>
> [ 1.575054] ------------[ cut here ]------------
>
> [ 1.575070] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11879
> intel_modeset_check_state+0x66f/0x770()
>
> [ 1.575247] ---[ end trace 386b12882abb18b6 ]---
>
> [ 1.575250] ------------[ cut here ]------------
>
> [ 1.575256] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11879
> intel_modeset_check_state+0x66f/0x770()
>
> [ 1.575409] ---[ end trace 386b12882abb18b7 ]---
>
> [ 1.575411] ------------[ cut here ]------------
>
> [ 1.575417] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11900
> intel_modeset_check_state+0x62a/0x770()
>
> [ 1.575569] ---[ end trace 386b12882abb18b8 ]---
>
> [ 1.575571] ------------[ cut here ]------------
>
> [ 1.575578] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11900
> intel_modeset_check_state+0x62a/0x770()
>
> [ 1.575735] ---[ end trace 386b12882abb18b9 ]---
>
> [ 1.575741] ------------[ cut here ]------------
>
> [ 1.575747] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11879
> intel_modeset_check_state+0x66f/0x770()
>
> [ 1.575919] ---[ end trace 386b12882abb18ba ]---
>
> [ 1.575922] ------------[ cut here ]------------
>
> [ 1.575929] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11879
> intel_modeset_check_state+0x66f/0x770()
>
> [ 1.576069] ---[ end trace 386b12882abb18bb ]---
>
> [ 1.576070] ------------[ cut here ]------------
>
> [ 1.576076] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11900
> intel_modeset_check_state+0x62a/0x770()
>
> [ 1.576216] ---[ end trace 386b12882abb18bc ]---
>
> [ 1.576219] ------------[ cut here ]------------
>
> [ 1.576225] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11900
> intel_modeset_check_state+0x62a/0x770()
>
> [ 1.576368] ---[ end trace 386b12882abb18bd ]---
>
> [ 1.576389] ------------[ cut here ]------------
>
> [ 1.576395] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11879
> intel_modeset_check_state+0x66f/0x770()
>
> [ 1.576536] ---[ end trace 386b12882abb18be ]---
>
> [ 1.576538] ------------[ cut here ]------------
>
> [ 1.576544] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11879
> intel_modeset_check_state+0x66f/0x770()
>
> [ 1.576684] ---[ end trace 386b12882abb18bf ]---
>
> [ 1.576685] ------------[ cut here ]------------
>
> [ 1.576691] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11900
> intel_modeset_check_state+0x62a/0x770()
>
> [ 1.576858] ---[ end trace 386b12882abb18c0 ]---
>
> [ 1.576861] ------------[ cut here ]------------
>
> [ 1.576868] WARNING: CPU: 1 PID: 1685 at
> drivers/gpu/drm/i915/intel_display.c:11900
> intel_modeset_check_state+0x62a/0x770()
>
> [ 1.577012] ---[ end trace 386b12882abb18c1 ]---
>
> [ 1.859978] usb 1-2: ep 0x81 - rounding interval to 64 microframes,
> ep desc says 80 microframes
>
> [ 1.869761] usb 1-2: ep 0x82 - rounding interval to 1024 microframes,
> ep desc says 2040 microframes
>
> [ 2.039315] userfastboot: graphics OK
>
> *****
>
>
>
> The DHCP error in that list has me a bit worried since provisioning is
> supposed to happen over Ethernet.
>
> From the console, I can access a shell prompt.
>
>
>
> Any help is greatly appreciated!
>
> --
> Dave Smith, PE
>
> @devunwired
>
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
More information about the elinux-MinnowBoard
mailing list