[MinnowBoard] Fastboot Problems - Android Bring-up
Wei, David
david.wei at intel.com
Wed Jun 10 01:37:10 UTC 2015
MNW2MAX1.X64.0080.R01.1505111746 firmware has “Enabled Dual-HDMI display outputs”. This should be the cause of this problem. Android and firmware team have started to look at this issue.
Thanks,
David | SSG BIOS
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Dave Smith
Sent: Tuesday, June 09, 2015 10:33 PM
To: elinux-minnowboard at lists.elinux.org
Subject: [MinnowBoard] Fastboot Problems - Android Bring-up
Hello all -
I’m going through my first run with the MinnowBoard attempting to load the pre-built Android package:
https://01.org/android-ia/guides/android-5.x-lollipop-bring-guide
I was able to successfully flash the latest firmware, so my board is now running:
MinnowBoard MAX B3 Platform
MNW2MAX1.X64.0080.R01.1505111746
I downloaded the Android 5.1.0_r1 package for 64-bit from the above link.
I am now attempting to boot into fastboot and flash the image. I have successfully flashed the image onto USB media, but when I attempt to boot from that device there are no graphics on the screen (after the secure boot warning), and I can’t do anything useful from the serial console.
Here is what I see out the serial console after selecting the USB media as the boot device (and pressing up to bypass the secure boot screen):
*****
entering Fastboot mode
Locating boot image from file \fastboot.img
Read boot image from file (13669676 bytes)
verify Fastboot boot image
decoding keystore data
BootSignature format version 1
get boot image header
decoding boot image signature
BootSignature format version 1
verifying boot image
chainloading fastboot, boot state is ORANGE
chainloading boot image, boot state is ORANGE
Creating command line
Loading the ramdisk
ramdisk size 5204458
Loading the kernel
[ 0.019057] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.019057] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.098678] EM:OEM0 table not found!!
[ 0.415527] intel_setup_crystal_cove_sd_regulators: no match device found
[ 0.700807] hpet: number irqs doesn't agree with number of timers
[ 0.786072] ------------[ cut here ]------------
[ 0.791287] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:52 sysfs_warn_dup+0x86/0xa0()
[ 0.799785] sysfs: cannot create duplicate filename '/devices/virtual/extcon/hdmi'
[ 0.808710] ---[ end trace 386b12882abb18b3 ]---
[ 0.813927] ------------[ cut here ]------------
[ 0.819123] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x284/0x3f0()
[ 0.828776] ---[ end trace 386b12882abb18b4 ]---
[ 0.938056] mei_txe 0000:00:1a.0: TXE8086: acpi __CRS resource not found
[ 0.989940] intel_byt_dts_thermal: request_threaded_irq ret -22
[ 1.032730] intel_rapl: RAPL domain package detection failed
[ 1.039106] intel_rapl: RAPL domain core detection failed
[ 1.045197] intel_rapl: RAPL domain uncore detection failed
[ 1.051464] intel_rapl: RAPL domain dram detection failed
[ 1.057555] intel_rapl: no valid rapl domains found in package 0
[ 1.084405] otg_wakelock_init: No USB transceiver found
[ 1.090902] init: failed to probe driver -19
[ 1.098274] had: Vidya: Enter alsa_card_intelhad_init
[ 1.209036] init: could not import file '/init.userfastboot.rc' from '/init.rc'
[ 1.494081] init: /dev/hw_random not found
[ 1.499939] init: /dev/hw_random not found
[ 1.514801] init: Warning! Service dhcpcd_eth0 needs a SELinux domain defined; please fix!
[ 1.533180] userfastboot: starting graphics
[ 1.575054] ------------[ cut here ]------------
[ 1.575070] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11879 intel_modeset_check_state+0x66f/0x770()
[ 1.575247] ---[ end trace 386b12882abb18b6 ]---
[ 1.575250] ------------[ cut here ]------------
[ 1.575256] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11879 intel_modeset_check_state+0x66f/0x770()
[ 1.575409] ---[ end trace 386b12882abb18b7 ]---
[ 1.575411] ------------[ cut here ]------------
[ 1.575417] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11900 intel_modeset_check_state+0x62a/0x770()
[ 1.575569] ---[ end trace 386b12882abb18b8 ]---
[ 1.575571] ------------[ cut here ]------------
[ 1.575578] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11900 intel_modeset_check_state+0x62a/0x770()
[ 1.575735] ---[ end trace 386b12882abb18b9 ]---
[ 1.575741] ------------[ cut here ]------------
[ 1.575747] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11879 intel_modeset_check_state+0x66f/0x770()
[ 1.575919] ---[ end trace 386b12882abb18ba ]---
[ 1.575922] ------------[ cut here ]------------
[ 1.575929] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11879 intel_modeset_check_state+0x66f/0x770()
[ 1.576069] ---[ end trace 386b12882abb18bb ]---
[ 1.576070] ------------[ cut here ]------------
[ 1.576076] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11900 intel_modeset_check_state+0x62a/0x770()
[ 1.576216] ---[ end trace 386b12882abb18bc ]---
[ 1.576219] ------------[ cut here ]------------
[ 1.576225] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11900 intel_modeset_check_state+0x62a/0x770()
[ 1.576368] ---[ end trace 386b12882abb18bd ]---
[ 1.576389] ------------[ cut here ]------------
[ 1.576395] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11879 intel_modeset_check_state+0x66f/0x770()
[ 1.576536] ---[ end trace 386b12882abb18be ]---
[ 1.576538] ------------[ cut here ]------------
[ 1.576544] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11879 intel_modeset_check_state+0x66f/0x770()
[ 1.576684] ---[ end trace 386b12882abb18bf ]---
[ 1.576685] ------------[ cut here ]------------
[ 1.576691] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11900 intel_modeset_check_state+0x62a/0x770()
[ 1.576858] ---[ end trace 386b12882abb18c0 ]---
[ 1.576861] ------------[ cut here ]------------
[ 1.576868] WARNING: CPU: 1 PID: 1685 at drivers/gpu/drm/i915/intel_display.c:11900 intel_modeset_check_state+0x62a/0x770()
[ 1.577012] ---[ end trace 386b12882abb18c1 ]---
[ 1.859978] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.869761] usb 1-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 2.039315] userfastboot: graphics OK
*****
The DHCP error in that list has me a bit worried since provisioning is supposed to happen over Ethernet.
From the console, I can access a shell prompt.
Any help is greatly appreciated!
--
Dave Smith, PE
@devunwired
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150610/d831dda4/attachment-0001.html>
More information about the elinux-MinnowBoard
mailing list