[MinnowBoard] Silverjaw working?
Jeremy Hoel
jthoel at gmail.com
Sat Jun 6 20:26:24 UTC 2015
So, just to close the loop up on this. TinCanTools took a look at the
board I had and there was no problems with it, so it must be my MBM. I was
able to get one from someone else in town to test and it came up just fine
and it's seen, so it must be a problem with the MBM i have and it's high
speed connector. Sucks, but at least I know the problem.
Thanks for everyone that helped.
On Wed, May 20, 2015 at 1:56 PM, Markus Maier <maier.m at web.de> wrote:
> Hi Jeremy,
>
>
>
> just to be sure: Check Device Management->System Setup->South Cluster
> Configuration->SATA Drives. The mSATA drive should show up there if it’s
> properly recognized by the lure/board. If not, I would also suggest an RMA
> for the lure.
>
>
>
> Best Regards
>
> Markus
>
>
>
>
>
>
>
> David, That is my task for today. I just wanted to make sure I had tried
> everything else before I sent it back to them. I have an RMA open with
> TinCanTools.
>
>
>
> On Wed, May 20, 2015 at 8:56 AM, Anders, David <david.anders at intel.com>
> wrote:
>
> Jeremy,
>
>
>
> I suggest that you RMA the silverjaw back to the manufacturer for them to
> check the board. the mSATA card should be detect automatically without any
> interaction on your part with regards to the firmware.
>
>
>
> Dave
>
>
>
> *From:* elinux-MinnowBoard [mailto:
> elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Jeremy Hoel
> *Sent:* Tuesday, May 19, 2015 11:59 PM
>
>
> *To:* MinnowBoard Development and Community Discussion
> *Subject:* Re: [MinnowBoard] Silverjaw working?
>
>
>
> With a mSata drive installed the only options I see in the Boot Manger are
> EFI Shell and IPv4/IPv6 network options. It basically looks the same with
> or without the mSata drive in it's slot.
>
>
>
> With a normal sata drive attached, I actually get an option for that
> drive, so I know at least the onboard sata channel works.
>
>
>
>
>
>
>
> On Sun, May 17, 2015 at 8:38 PM, Wei, David <david.wei at intel.com> wrote:
>
> Could you attach your mSATA to platform and boot into UEFI Shell? Then
> tell us if any devices are listed by UEFI Shell?
>
>
>
> How to boot to UEFI Shell
>
> (1) Power on the board and keep pressing “F2” key on your keyboard,
> which will allow you to enter BIOS Setup.
>
> (2) Enter “Boot Manager” of BIOS Setup, and then select UEFI Shell to
> boot.
>
>
>
> Thanks,
>
> David | SSG BIOS
>
>
>
> *From:* elinux-MinnowBoard [mailto:
> elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Jeremy Hoel
> *Sent:* Friday, May 15, 2015 1:44 PM
> *To:* MinnowBoard Development and Community Discussion
> *Subject:* Re: [MinnowBoard] Silverjaw working?
>
>
>
> Sorry, I was out of town for a bit.
>
>
>
> With no other devices attached, when I boot I see:
>
>
>
> UEFI Interactive Shell
>
> EDK II
>
> EUFI v2.40 (EDK II, 0x00010000)
>
> Error. No mapping gound
>
> Press ESC to skip....
>
>
>
> I get that with two different, known working mSata drives.
>
>
>
> I get the same thing with no drive installed.
>
>
>
> On Thu, May 7, 2015 at 11:30 AM, Bill Traynor <btraynor at gmail.com> wrote:
>
> Hi Jeremy,
>
> When the mSATA drive and mPCIe wireless card are plugged into the
> Silverjaw and you power up the Max what happens? Does the Max default
> to the UEFI shell? If it does, what is displayed?
>
>
> On Thu, May 7, 2015 at 1:13 PM, nb <nb at dagami.org> wrote:
> > Hi Jeremy,
> >
> > I’ve had sometimes non detected disks.
> > Everytime it was a power supply issue.
> > Hope this helps
> >
> > nb
> >
> >
> >> Le 7 mai 2015 à 18:27, Jeremy Hoel <jthoel at gmail.com> a écrit :
> >>
> >> So i tested the mSata in another laptop and it worked, and i grabbed
> that mSata (that was in the laptop and working) and tested it in the
> silverjaw and it still wasn't detected by the firmware as a boot option, no
> in the OS when live booed. Is there something in the efi firmware settings
> that I should make sure ie enabled?
> >>
> >> I'll give Mint a try and see if that finds the drive.
> >>
> >> On Thu, May 7, 2015 at 6:02 AM, Bill Traynor <btraynor at gmail.com>
> wrote:
> >> Worked perfectly for me as well. I have an Adata 120GB drive.
> >> Installed Debian straight to it.
> >>
> >> On Thu, May 7, 2015 at 7:57 AM, Scott Guthrie <scottgu3 at gmail.com>
> wrote:
> >> > Sounds like your best bet. My crucial M550 worked perfectly, but I'm
> also
> >> > running Linux Mint 17.1 Rebecca (XFCE).
> >> >
> >> > Scott
> >> >
> >> > On Thu, May 7, 2015 at 1:18 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
> >> >>
> >> >> Ok, well after talking with John, I upgraded my firmware from .73 to
> .79.
> >> >> I still can't see the msata, but i can see the wireless, so I'm
> going to try
> >> >> and find another msata to use to test.
> >> >>
> >> >>
> >> >> On Wed, May 6, 2015 at 9:58 PM, Jeremy Hoel <jthoel at gmail.com>
> wrote:
> >> >>>
> >> >>> well unless the board is labeled wrong, it's in the msata slot.
> look at
> >> >>> it when it's attached, i's the slot on the left.
> >> >>>
> >> >>> On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com
> >
> >> >>> wrote:
> >> >>>>
> >> >>>> Make sure the msata is in the msata slot not the mpcie...
> >> >>>>
> >> >>>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com> wrote:
> >> >>>>>
> >> >>>>> So, I got my silverjaw and my nice new 3amp PS showed up today,
> so I
> >> >>>>> wanted to give it a go this evening. I've got a Samsung mSata
> 256GB
> >> >>>>> installed (MZ-MPC256D) but it seems like the CentOS installed
> doesn't see
> >> >>>>> it.
> >> >>>>>
> >> >>>>> Are their any particular firmware settings that need to be
> installed
> >> >>>>> for an OS to see the card? I measured 3.3 and 5v at the test
> points to the
> >> >>>>> ground post, but no lights come on when the MBM is powered. Is
> there a
> >> >>>>> power LED?
> >> >>>>>
> >> >>>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
> >> >>>>> doesn't see anything in dmesg for sda or msata.
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>> _______________________________________________
> >> >>>>> elinux-MinnowBoard mailing list
> >> >>>>> elinux-MinnowBoard at lists.elinux.org
> >> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >> >>>>>
> >> >>>>
> >> >>>> _______________________________________________
> >> >>>> elinux-MinnowBoard mailing list
> >> >>>> elinux-MinnowBoard at lists.elinux.org
> >> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >> >>>>
> >> >>>
> >> >>
> >> >>
> >> >> _______________________________________________
> >> >> elinux-MinnowBoard mailing list
> >> >> elinux-MinnowBoard at lists.elinux.org
> >> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >> >>
> >> >
> >> >
> >> > _______________________________________________
> >> > elinux-MinnowBoard mailing list
> >> > elinux-MinnowBoard at lists.elinux.org
> >> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >> >
> >> _______________________________________________
> >> elinux-MinnowBoard mailing list
> >> elinux-MinnowBoard at lists.elinux.org
> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>
> >> _______________________________________________
> >> elinux-MinnowBoard mailing list
> >> elinux-MinnowBoard at lists.elinux.org
> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150606/7236de19/attachment-0001.html>
More information about the elinux-MinnowBoard
mailing list