[MinnowBoard] Where is the MBM I2S driver in Linux
li yuqian
li770426 at gmail.com
Thu Jun 4 06:10:45 UTC 2015
Hi Liam,
2015-06-03 16:55 GMT+08:00 Liam Girdwood <liam.r.girdwood at linux.intel.com>:
> On Tue, 2015-06-02 at 18:27 +0100, Strasser, Kevin wrote:
> > Hi Li,
> >
> > On 06/01/15 8:03 PM, li yuqian wrote:
> > > check those driver, and i can understand there are three parts for the
> LPE
> > > driver to working, special for the LPE firmware need to adde it. i can
> figure
> > > it out in the
> > >
> https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/tree/sound/soc/intel/sst-acpi.c?id=refs/tags/v4.0.4
> > > line 249 and 250.
> > >
> > > but when i checked that sst-acpi.c, i found the baytrial sst is not
> support
> > > the DMA data transfer, see the resindex_dma_base = -1 in line 262 and
> line 51
> > > /* DMA only valid when resindex_dma_base != -1*/
> > >
> > > Am i correct? the MBM i2s does not support DMA data transfer?
> >
> > You are correct, the Bay Trail LPE driver does not use DMA. I think that
> is just
> > a driver limitation, and does not necessarily indicate that the hardware
> isn't
> > capable.
> >
> > Liam, can you provide any context here?
>
> The BYT audio DSP driver does not use DMA for loading the FW from host
> memory to DSP memory, but it does use DMA for audio playback and capture
> (controlled by the FW). The BYT audio driver just does a memcpy() of the
> FW from host to DSP memory.
>
> Liam
>
> >
> > Thanks,
> > Kevin
>
>
> Thanks for the explanation. is there more details information for that
"controlled by FW"? such as what is the data width of FW required, is that
fixed or user can change? in other words, should i use different that FW to
do different data width, sync clock and sst clock? also, i found the TIZEN
have some different FW for download in INTEL website in
https://downloadcenter.intel.com/download/23903/Intel-Atom-Processor-E3800-Series-Linux-support-package-LPE-Firmware-for-Tizen-IVI-3-0-M2-Kernel-3-10-LTSI,
can i use those FW to load to mainline kernel to support different mode of
LPE, such as the master/slave mode with different sync, main clock?
thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150604/f3292157/attachment.html>
More information about the elinux-MinnowBoard
mailing list