[MinnowBoard] no suitable video mode found booting in blind mode

[nb]

Hi Luca,

I can say that for a reason I can’t explain, Debian graphical install is not possible via FDTI.
I trie it some time ago and it didn’t work.
It’s possible only via micro-HDMI

Hope this helps

nb


> Le 21 mai 2015 à 23:34, Luca <l.cappe at gmail.com> a écrit :
> 
> Hi Ken,
> 
> i don't use mouse, keyboard and monitor, because i haven't the HDMI<->microHDMI cable.
> So i'm using the serial port (FDTI 232 3.3V, 4 wire).
> The response are "yes it works", i'm able to enter in UEFI Interactive Shell for all steps.
> For the step 2, i'm able to see the device in the boot list (fs0), for the step 3 i don't see the device in the list.
> 
> Luca.
> 
> 2015-05-21 23:23 GMT+02:00 Ken Tait <ktait at venturesystemdesign.com>:
> Luca,
> 
> Well that clearly sounds like something else is not right here..3A should be enough.
> 
> Let's get back to basics..
> 
> Step 1:
> Connect->bare board, power supply, monitor, keyboard and mouse. NO boot device or USB keys.
> DO NOT CONNECT THE NETWORK HERE...
> 
> Does this come up in the bios or boot shell?? Yes or NO...
> 
> Does it clearly see your mouse and keyboard & monitor..this is fairly critical?
> 
> Step 2:
> if this comes up, remove power, add a boot device(SD card prefered)...what happens?
> Does this work. Yes or No?
> 
> Step 3: Remove SD card if it worked, try USB boot device.
> Does this work. Yes or NO.
> 
> You have to take this step by step and see where it's going off the rails, you have too many variables now..
> 
> Regards
> 
> Ken
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard